taultunleashed

I got Xunleashed v3.88 RC12 (x86) - Sep 14 and can´t geting this error msg each time i try starting it.

-------------------------------------------------------------------------------
SwgClient: SwgClient_r.exe - Application Error
The exception Breakpoint
A breakpoint has been reached.
(0x80000003) occurred in the application at location 0x00981acf.

Click on OK to terminate the program
Click on Cancel to debug program
-------------------------------------------------------------------------------

If u get the same error msg i would like to know (that will comfirme my suspicions about it been direcx 9.c who is the villain in this case)

I'm running the same with 9.c and a nVidia graphic card.

No crashes here.

I got a Radeon 9700 Pro.

I dont think it is a video card problem, but it could be.

Have you tried different graphics drivers?

What about different graphics modes/resolutions?



Does the DX8 and DX9 test config work ok?

Ok here is the deal.
I have tried re-install SWG and Xun = did not work
I have tried re-install Graphic drivers = did not work
I have tried changeing graphic cards = did not work
I have checked my memories to see if there was som hardwear problems, and i was not.

The only thing that is left now is to re-install windows and go back to DirecX9.b to see if it´s working.

And yes i tried every combination in the Xunleashed of unmarking and marking things like sniff tcp.

There is NO virus on the computer, i checked it with 4 different virus programs. so it´s cleaner then my aparment.

You would be supprised at how many problems are solved with a reinstall of windows.

Tell me about it.

Make sure you are not using the anti-detection, it might cause problems.

I am getting this same error i have tried several things without solving the problem. If you had this how did you fix it?