New working double slice
Posted: April 5th, 2004, 8:53 am
Leveling slicing today and found this out, you can still double slice terminals which makes that painful slicing 2 go a heck of a lot quicker.
Double slice refresher:
1. Start the slice on the terminal, apply clamp, cut first wire
2. Select second wire to cut but do not cut
3. Pull up the radial menu on the terminal again and highlight the slice option
4. Press the enter key and release the mouse button at the same time
5. Terminal will slice, 100xp, second slice window will open, complete second slice for another 100xp
Allows you to get 200xp / 2 min instead of the usual 100xp.
Double slice refresher:
1. Start the slice on the terminal, apply clamp, cut first wire
2. Select second wire to cut but do not cut
3. Pull up the radial menu on the terminal again and highlight the slice option
4. Press the enter key and release the mouse button at the same time
5. Terminal will slice, 100xp, second slice window will open, complete second slice for another 100xp
Allows you to get 200xp / 2 min instead of the usual 100xp.
