taultunleashed

Code: Select all

+ ------------------------------------------------------------- + 
| Official TAULT.com Lineage II Exp Bot v0.3 By Sirusdv & ninji | 
|                           04/17/04                            | 
+ ------------------------------------------------------------- + 

WHAT THIS BOT DOES: 

*  Hunts 3 types of mobs if the first is gone it will move onto the seccond and etc. 
*  Picks up to 2 different items after a mob kill 
*  Rests if HP falls bellow ~50% 
*  Drinks potion if HP falls bellow ~20% 
*  Revives self if dead 
*  Detects agros and kills them 
*  Attempts to move around if stuck or all enemies are exhausted 



TO USE: 
1.  Paste script into ACTool 4.4.7 NON-BETA 
2.  Set up CONFIG area bellow 
3.  Start Lineage II and configure it to run at 800x600x16 resolution with the default positions for everything (Use the Interface button to reset) with enter-chat ENABLED! 
4.  Login and set up your charecter to be in the area you would like to hunt in 
5.  Alt-Tab out and click start 


NEWS: 
RESPAWN EXPLOIT ADDED!!!! 
Agros actually get detected better and are fought against! 



CHANGELOG: 
* too much to list 
* fixed the CanRest = True error 
* Fixed L2Say for proper fkey use 
* Will not kill steal 
* Wont sit down while being attacked ( will actually fight agros (!) ) 
* Fixed random movement 
* This should have been the initial release for obvious reasons so consider it the first working release. 

*) 

Constants 
  
  /////////////////////////////////////////////////////// 
  ////////////////////CONFIG START/////////////////////// 
  /////////////////////////////////////////////////////// 
  
  //NOTE: be sure not to have a space after the equals sign for typed commands. 
  //      DO NOT USE {F10} ACTools cannot press it properly!! 
  
  
  AutoRespawn =True                                    //Set this to False if you dont want to automatically respawn (No need to fill out rest of this section if you disable it) 
  Username =YOURUSERNAME                               //Your Username 
  Password =YOURPASSWORD                               //Your Password 
  ServerNumber =1                                      //The number on the left corresponding to your server (EG #1 is Bartz) 
  CharecterPosition =1                                 //The Position of your charecter in the charecter selection menu 
  LoginDelay =500                                      //delay between clicking login button (500 = 1/2 seccond) 
  StartupDelay =20 sec                                 //How long it takes to start Lineage II 
  LoadingDelay =10 sec                                 //How long it takes to load the world 
  ApplicationPath = D:\games\Lineage II\System\L2.exe  //Path to L2.exe 
  
  Target1 ={F5}                                        //Set this to your nearest target hotkey to target possible agro (you really dont want to change this to anything else or you WILL die) 
  Target2 =/target [balor orc fighter]                 //Primary target you want to attack 
  Target3 =/target [forest walking fungus]             //Fail safe target, do you really want to idle while creatures spawn? 
  
  Attack =/attack                                      //Key or Command bound to the normal attack you want to use (Mages: set this to {null} and use Special and SpecialDelay) 
  
  Special ={F4}                                        //In-Attack/combat skill. If you are not going to use set to {NULL} 
  SpecialDelay =2000                                   //How often to check if you can cast If you are not going to use set to 0 or above [ Best to leave at 2000 for any skill ] 
  
  aura ={F6}                                           //Aura/Non-combat skill. If you are not going to use set to {NULL} 
  AuraDelay =10 min                                    //How often should the aura be cast. If you are not going to use set to 0 or above [ Set to the time in MS it takes for you aura to expire 
  AuraCastTime =11 sec                                 //how long does it take to cast the aura 
  
  Pickup =/pickup                                      //Key or Command bound to pickup 
  Potion ={F9}                                         //Key bound to ANY KIND of potions 
  
  /////////////////////////////////////////////////////// 
  ////////////////////CONFIG END///////////////////////// 
  /////////////////////////////////////////////////////// 

Code: Select all

//Lineage II Resolution Redundant Auto Login v1.0 By Sirusdv 04/11/04 
//----------------- 
//How To Use: Just Start Lineage 2 Alt-Tab out and start the macro! 

Constants 
  Username = YOURUSERNAME 
  Password = YOURPASSWORD 
  ServerNumber = 1 //Bartz 
  LoginDelay = 500 //1/2 Seccond 
  StartupDelay = 10000 //10 Secconds