100% enchant rate
Posted: April 30th, 2007, 6:28 am
http://www.qmacro.com/download.htm
1)Run Qmacro and press add
2)Go to script subpage and write the following :
MoveTo 303 326
LeftClick 1
Delay 78
LeftUp 1
Delay 94
LeftUp 1
Delay 150
3)Define a start key and a stop key
4)Press the loop button and select Loop until stop key pressed.
5)Then define a name of your macro in the description
6)Click save and close the window.
7)In the main window of Qmacro check the box besides your macro (enable box)
8)Your Macro Is Ready!
Enchant Bot Preparation
1-Load hLapEx
2-Load Quick Macro (Aka Qmakro)
3-Run L2.exe
4-Buy Some Enchants
5-Hit an enchant once and then select the item you want to enchant.(**Dont Click OK yet )
6-Go to hLapEx and hit Capture
7-Then go to the lineage 2 window and hit ok to enchant the item.
8-Go to hlapex and then press stop.You will see a packet (color=orange) requestenchantitem.Just copy to send and press auto.
9-Run the macro a few times adjusting the place of the inventory,until the mouse is over the first enchant.
10-Go to Lineage 2 Window and hit the start button (of Qmacro) and let the macro begin enchanting.
Attention *: You can edit your macro all you want but be careful because if you enchant your items too fast you may be kicked out from the server.
-if you want to enchant another item you have to capture a new packet for the weapon.
ps. have fun
1)Run Qmacro and press add
2)Go to script subpage and write the following :
MoveTo 303 326
LeftClick 1
Delay 78
LeftUp 1
Delay 94
LeftUp 1
Delay 150
3)Define a start key and a stop key
4)Press the loop button and select Loop until stop key pressed.
5)Then define a name of your macro in the description
6)Click save and close the window.
7)In the main window of Qmacro check the box besides your macro (enable box)
8)Your Macro Is Ready!
Enchant Bot Preparation
1-Load hLapEx
2-Load Quick Macro (Aka Qmakro)
3-Run L2.exe
4-Buy Some Enchants
5-Hit an enchant once and then select the item you want to enchant.(**Dont Click OK yet )
6-Go to hLapEx and hit Capture
7-Then go to the lineage 2 window and hit ok to enchant the item.
8-Go to hlapex and then press stop.You will see a packet (color=orange) requestenchantitem.Just copy to send and press auto.
9-Run the macro a few times adjusting the place of the inventory,until the mouse is over the first enchant.
10-Go to Lineage 2 Window and hit the start button (of Qmacro) and let the macro begin enchanting.
Attention *: You can edit your macro all you want but be careful because if you enchant your items too fast you may be kicked out from the server.
-if you want to enchant another item you have to capture a new packet for the weapon.
ps. have fun