taultunleashed

ok what you do is this you make a macro listed below then you goto a vendor
dont click on it just target it then use the macro and wala your searching the bazzar
gg soe once agian

lrn2exploit

Step1 goto any vendor ingame
step2 target the vendor do not open the vendor windo
step3 use macro
Note- If you bring up the vendor window this will error every tiem u gota do this without bringing up the vendor window
sometimes u may havta retarget the vendor and hit the macro again

make a macro name it what ever

/target me;
/ui action terminalAuctionUse;

BIG THUMBS DOWN!

Doing this macro only causes you to get stuck with a constant error message.

yes, it's like this since the new auto-aim system.
I suppose they changed the internal system of targetting.

So it doesn't work anymore.

yall are wrong ive been doing this for the past week you cannot use the vendor inorder to do this or u will get that message target the vendor dont open it up just target the vendor thin put in the macro bam u can search the bazzar and this works i do it every night

o and fyi you CANT serch the vendor prier to this or it wont work if u serch the vendor prior to this u goto log out and back in inorder for it work

lrn2exploit

Step1 goto any vendor ingame
step2 target the vendor do not open the vendor windo
step3 use macro
Note- If you bring up the vendor window this will error every tiem u gota do this without bringing up the vendor window

Can premium members say yay or nay to this being moved to a confirmed section.

Yay. Works well tried it a couple days ago.

You dont need a macro. Though it makes it easy to assign a button to it.

confirmed 500 to you and moved to confirmed

Still works as of 21/09/06 (that's 21st of September for anyone who uses their calendar system with 09/21/06)

Yah thats to correct way to display a date there cobadass

I found that sometimes you need to clear your target and target another vendor if you have used the first vendor already.

if you set your right mouse button (or any button) to "select target" then you use that and it doesnt open the bazzar. then run his macro.

Or simply target something else, then go back to the terminal. Which is what the macro does.

This used to work with any item in a house too. Not sure if it still works like that but I will test it and see it if still works. It has been a few years since I have tried this.

CONFIRMED - thumbs up! I used the macro as posted and wrestled with it a bit but finally figured out how to work it. As stated, you have to do this on a vendor that you havent browsed yet.

To get it to work, I put the macro in my toolbar (Slot 6) and selected a random item in the room. Then I hovered my mouse over the unbrowsed vendor (without selecting it), pressed the "6" key and presto... Bazaar search opened.

EDIT: BTW, I want to thank the OP for this submission. This trick will save my trader alt unbelievable amounts of time, travel and hassle!

This certainly does make painful vendor management a little easier.

ya its a nice time saver