Maple Story Hack [TUT]
Posted: August 6th, 2008, 8:06 pm
CREDITS GO TO BLUEMONKE99 FROM GOZ 
CHEAT TABLES INCLUDED - icetable.CT - NEWEST
tomnelson.CT - tomnelson
Devilsin.CT - Newest
EbilMe's.CT
Maplestory.exe.CT (incase you want to make your own cheat table)
Mariokiller64'sCT.CT
And the newest v.33.CEM is in there updated it works!!!!
By the way don't use msbot with this dpttp or saruengang OR MSPRO just use wat i have included in my folder thats it!
Ok, first off download and extract the .rar to your desktop everything you need is in there ( ALONG WITH MY CHEAT TABLE biggrin.gif biggrin.gif biggrin.gif ) anyway...
Ok go into dxwnd and make sure your dxwnd follows the right path to your maplestory.exe if it doesnt right click hit modify and then the [...] button ( Top right hand corner ) and seach for it (Probably in program files somewere) After it is set up just leave it open at the top.
Now go into your akuma engine folder and run the engine, Then go to the left top hand corner and hit the [settings] button these pics will tell you wat boxes to tick ____LOOK DOWN____
http://img.photobucket.com/albums/v6...SDFSFSDSDF.jpg
http://img.photobucket.com/albums/v6...ansettings.jpg
http://img.photobucket.com/albums/v6...Codefinder.jpg
http://img.photobucket.com/albums/v6... ... embler.jpg
http://img.photobucket.com/albums/v6...tacops/uSE.jpg
If you cant see the pictures
Akuma Engine Settings:
General Settings:
Tick Everything
Update Interval:500
Found Address List:1000
Freeze Interval:1
Scan Settings:
[X] Fast scan on by default
[ ] Enable hyperscan when possible
[ ] Don't scan memory that is protected with the No Cache Option
[ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan
[x] MEM_PRIVATE
[x] MEM_IMAGE
[ ] MEM_MAPPED
[X] Run scan in seperate thread.
Thread Priority:HIGHER
File Associations:
Tick Nothing
Code Finder:
[x] Use Debug Registers
[ ] Memory Access Exceptions
[x]Try to prevent detection of the debugger
[ ] Handle breakpoints not caused by CE
Assembler:
[x] Show disassembler
[x] Show debugger options
[x] Use hardware breakpoints
[ ] Use int3 instructions for breakpoints
[x] Replace incomplete opcodes with nops
[x] Ask for replace with nop
[x] Try to prevent detection of the debugger
Extra:
[ ] Query memory region routines
[x] Read/Write process memory
[x] Open Process
[ ] Use APC to inject dll's
[ ] Use APC to create new threads
[ ] Undo changes to CE
[ ] Force memory to be writable in case the standard method is blocked
[x] Enable use of Process Watcher
[x] Use kernel debugger options when possible
[ ] Stealth mode (Usermode)
[X] Stealth mode (Kernelmode)
After you set your settings up right click the [cheattable] button (LOCATED AT THE TOP LEFT CORNER) and click whatever cheat table you want then you need to execute maple from dxwnd
and no were else.
After you execute maplestory from dxwnd you will now need to click the process watcher the first picture below shows were it is located. In the process watcher you need to double click Maplestory.exe and then when the pop up comes up hit ok, DO THIS BEFORE THE GAME STARTS!!!! if you missed it then just exit maplestory and try again, when you have attached maplestory.exe through the process watcher tick crc bypass and get ready to hack biggrin.gif. Remmber that you need to try and double click ( attach ) maplestory.exe to your engine and tick crc bypass before the game actually starts.
Reduced: 80% of original size [ 800 x 500 ] - Click to view full image
CREDITS GO TO
ice - cheat table
ebile - cheat table
devilsins - cheat table
and
MARIO64 for his cheat table biggrin.gif
PROOF THAT THIS ENGINE WORKS!!!
(stupid thing can't upload .rar files and upload max 4 image)
rapidshare: (duh isnt it obvious? It says rapidshare!)
http://rapidshare.com/files/16829344...ine33.rar.html
megaupload:
http://www.megaupload.com/?d=L12BV6YI
sendspace:
http://www.sendspace.com/file/kh4hbx
I recommend the newest devilsin ct
CREDITS TO BLUEMONKE99 FROM GOZ
CHEAT TABLES INCLUDED - icetable.CT - NEWEST
tomnelson.CT - tomnelson
Devilsin.CT - Newest
EbilMe's.CT
Maplestory.exe.CT (incase you want to make your own cheat table)
Mariokiller64'sCT.CT
And the newest v.33.CEM is in there updated it works!!!!
By the way don't use msbot with this dpttp or saruengang OR MSPRO just use wat i have included in my folder thats it!
Ok, first off download and extract the .rar to your desktop everything you need is in there ( ALONG WITH MY CHEAT TABLE biggrin.gif biggrin.gif biggrin.gif ) anyway...
Ok go into dxwnd and make sure your dxwnd follows the right path to your maplestory.exe if it doesnt right click hit modify and then the [...] button ( Top right hand corner ) and seach for it (Probably in program files somewere) After it is set up just leave it open at the top.
Now go into your akuma engine folder and run the engine, Then go to the left top hand corner and hit the [settings] button these pics will tell you wat boxes to tick ____LOOK DOWN____
http://img.photobucket.com/albums/v6...SDFSFSDSDF.jpg
http://img.photobucket.com/albums/v6...ansettings.jpg
http://img.photobucket.com/albums/v6...Codefinder.jpg
http://img.photobucket.com/albums/v6... ... embler.jpg
http://img.photobucket.com/albums/v6...tacops/uSE.jpg
If you cant see the pictures
Akuma Engine Settings:
General Settings:
Tick Everything
Update Interval:500
Found Address List:1000
Freeze Interval:1
Scan Settings:
[X] Fast scan on by default
[ ] Enable hyperscan when possible
[ ] Don't scan memory that is protected with the No Cache Option
[ ] Keep low memory usage when doing an "Unknown Initial Value scan" with Hyper Scan
[x] MEM_PRIVATE
[x] MEM_IMAGE
[ ] MEM_MAPPED
[X] Run scan in seperate thread.
Thread Priority:HIGHER
File Associations:
Tick Nothing
Code Finder:
[x] Use Debug Registers
[ ] Memory Access Exceptions
[x]Try to prevent detection of the debugger
[ ] Handle breakpoints not caused by CE
Assembler:
[x] Show disassembler
[x] Show debugger options
[x] Use hardware breakpoints
[ ] Use int3 instructions for breakpoints
[x] Replace incomplete opcodes with nops
[x] Ask for replace with nop
[x] Try to prevent detection of the debugger
Extra:
[ ] Query memory region routines
[x] Read/Write process memory
[x] Open Process
[ ] Use APC to inject dll's
[ ] Use APC to create new threads
[ ] Undo changes to CE
[ ] Force memory to be writable in case the standard method is blocked
[x] Enable use of Process Watcher
[x] Use kernel debugger options when possible
[ ] Stealth mode (Usermode)
[X] Stealth mode (Kernelmode)
After you set your settings up right click the [cheattable] button (LOCATED AT THE TOP LEFT CORNER) and click whatever cheat table you want then you need to execute maple from dxwnd
and no were else.
After you execute maplestory from dxwnd you will now need to click the process watcher the first picture below shows were it is located. In the process watcher you need to double click Maplestory.exe and then when the pop up comes up hit ok, DO THIS BEFORE THE GAME STARTS!!!! if you missed it then just exit maplestory and try again, when you have attached maplestory.exe through the process watcher tick crc bypass and get ready to hack biggrin.gif. Remmber that you need to try and double click ( attach ) maplestory.exe to your engine and tick crc bypass before the game actually starts.
Reduced: 80% of original size [ 800 x 500 ] - Click to view full image
CREDITS GO TO
ice - cheat table
ebile - cheat table
devilsins - cheat table
and
MARIO64 for his cheat table biggrin.gif
PROOF THAT THIS ENGINE WORKS!!!
(stupid thing can't upload .rar files and upload max 4 image)
rapidshare: (duh isnt it obvious? It says rapidshare!)
http://rapidshare.com/files/16829344...ine33.rar.html
megaupload:
http://www.megaupload.com/?d=L12BV6YI
sendspace:
http://www.sendspace.com/file/kh4hbx
I recommend the newest devilsin ct
CREDITS TO BLUEMONKE99 FROM GOZ
