EQ2 and Harvester 1.0 - Updated Howto guide - Page 4

Posted: January 14th, 2007, 1:41 pm

Quote

un0riginal

Total Posts: 123
Joined: November 20th, 2006, 4:39 am

Add more waypoints with shorter ranges between

If you read through your .ini each waypoint allows you to 'stop' before doing update.

; Waypoint7 = x,y,range,stop

; x is the X location
; y is the Y location
; Range is how far around this waypoint to harvest
; Stop is do we go to this spot and stop before continuing
;; it can be the word stop or true or direct or any value
;; that makes sense to you, including a number greater or
;; less than 0,
;; To say do NOT stop you can leave it blank or set it to 0
;; or false;

Posted: January 14th, 2007, 1:58 pm

Quote

floridasmb

So you are saying that it does the update MobDB at the end/start of every waypoint?

Posted: January 14th, 2007, 3:16 pm

Quote

un0riginal

Total Posts: 123
Joined: November 20th, 2006, 4:39 am

Not done java so not really up to scratch on reading through and seeing what exactly does what, but thats what I think it does. It should get node updates everytime it goes to a new waypoint.

But either way, go back and do a different path. I have a nice big path (over 200) in antonica, it doesn't matter if you have lots of waypoints it just makes it less likely for your bot to get stuck.

Posted: January 14th, 2007, 10:12 pm

Quote

floridasmb

Works like a charm with a little tweaking.

One more question lol. I am currently doing a zone where there are "!"'s and also "?"'s.

I cannot get the .ini to recognize colletion as both ? and !. I have to use ! or it locks up. Any ideas how I can get it to recognize and collect both?

Posted: January 15th, 2007, 1:25 am

Quote

un0riginal

Total Posts: 123
Joined: November 20th, 2006, 4:39 am

Why you you want to collect pages I don't know

Just change the zones misc to be a ! and leave the collection as ?, oh and change the misc hotkey to 6 (or whatever you have your collection hotkey as)

Posted: January 15th, 2007, 8:11 am

Quote

floridasmb

I dont want to collect the pages, but when the bot targets them it shuts down

Posted: January 15th, 2007, 1:09 pm

Quote

un0riginal

Total Posts: 123
Joined: November 20th, 2006, 4:39 am

It is only falling over because you have renamed one of the nodes incorectly. slap your .ini up.

Posted: January 16th, 2007, 1:21 pm

Quote

floridasmb2

Ok, here we go again hehe.....

I bought another Xunleashed for my 2nd puter. I re-downloaded everything fresh to the new puter and installed everything exactly right. I made the changes in the harvester .ini and dloaded eq2 service and makepath.

Ok, now, when I run Xunleashed and get the lil scripts window up while playing EQ2 and select makepath option and then click start.... it shows the famous : Script Running Press F12 to stop and just sits there. I let is sit for 15 mins and nothing. I have used all the default options and have alos tried it with use compatibility mode and without. Neither worked, both times just sat there doing nothing. I tried running harvester and makepath and neither worked.

I am going to post my XunleashedLog, I think it may have something to do with Dx9 according to it but i am clueless on how to fix it... Here is what it said :

01/16/07 05:12:44 PM Registered XUnleashed Controls...

01/16/07 05:12:44 PM Registered XUScriptHelper...

01/16/07 05:12:44 PM XUnleashed Client: Click Play to begin...

01/16/07 05:13:02 PM XUnleashed Client: Updating 3rd Party Plugins and Services...

01/16/07 05:13:02 PM XUnleashed Client: Patching Wyvern's EQ2 Servicer

01/16/07 05:13:02 PM XUnleashed Client: Retrieving the file: update

01/16/07 05:13:02 PM XUnleashed Client: Redirecting to alternate patch server. . .

01/16/07 05:13:02 PM XUnleashed Client: Retrieving the file: EQ2ServiceNews.txt

01/16/07 05:13:02 PM XUnleashed Client: Redirecting to alternate patch server. . .

01/16/07 05:13:03 PM XUnleashed Client: Retrieving the file: Global.map

01/16/07 05:13:03 PM XUnleashed Client: Redirecting to alternate patch server. . .

01/16/07 05:13:03 PM XUnleashed Client: Patching complete. . .

01/16/07 05:13:03 PM XUnleashed Client: Connecting to XUnleashed...

01/16/07 05:13:03 PM XUnleashed Client: Authenticating User...

01/16/07 05:13:03 PM XUnleashed Client: Connected...

01/16/07 05:13:03 PM Using Standard Hooking. . .

01/16/07 05:13:03 PM XUnleashed Client: Launching. . .

01/16/07 05:13:31 PM Found Target Process: EverQuest2.exe

01/16/07 05:13:31 PM Config Option: Display Logo

01/16/07 05:13:31 PM Config Option: Hook DirectX8

01/16/07 05:13:31 PM Config Option: Hook DirectX9

01/16/07 05:13:31 PM Config Option: Hook DirectInput

01/16/07 05:13:31 PM Initializing COM Objects. . .

01/16/07 05:13:33 PM Direct3D9 Detected

01/16/07 05:13:33 PM Starting Services. . .

01/16/07 05:13:33 PM ------->FOUND A StandardSERVICE: XUnleashed Windows Input Service

01/16/07 05:13:33 PM CXUWinInput::Initialize()

01/16/07 05:13:33 PM Starting the 3rd Party Services...

01/16/07 05:13:33 PM ------->FOUND A 3rd Party Service: Wyvern's EQ2 Servicer

01/16/07 05:13:33 PM Starting Plugins. . .

01/16/07 05:13:33 PM ------->FOUND A STANDARD Plugin: XUnleashed V4 EXhume Scripts

01/16/07 05:13:33 PM Loading Window Schema. . .

01/16/07 05:13:33 PM ------->FOUND A STANDARD Plugin: XUnleashed V2 Triggers

01/16/07 05:13:33 PM Loading Window Schema. . .

01/16/07 05:13:33 PM ------->FOUND A STANDARD Plugin: XUnleashed V2 Macros

01/16/07 05:13:33 PM Loading Window Schema. . .

01/16/07 05:13:33 PM ------->FOUND A STANDARD Plugin: XUnleashed V2 Scripts

01/16/07 05:13:33 PM Loading Window Schema. . .

01/16/07 05:13:33 PM FOUND: Direct3DCreate9

01/16/07 05:13:33 PM Attempting to lock onto Client. . .

01/16/07 05:13:33 PM WARNING: Requested DirectX9 Screen Format (15) may not be compatable with XUnleashed.

01/16/07 05:13:33 PM Contact XU to have them add this format!!!

01/16/07 05:13:34 PM FOUND: Direct3D9::CreateDevice()

01/16/07 05:13:34 PM DETECTED: Direct3DDevice9 Reset

01/16/07 05:13:34 PM WARNING: Requested DirectX9 Screen Format may be incompatable with XUnleashed.

01/16/07 05:13:34 PM FOUND: Direct3DDevice9::Present

01/16/07 05:13:34 PM Initializing DX9 BackBuffers...

01/16/07 05:13:40 PM DETECTED: Direct3DDevice9 Reset

01/16/07 05:13:40 PM WARNING: Requested DirectX9 Screen Format may be incompatable with XUnleashed.

01/16/07 05:13:40 PM FOUND: Direct3DDevice9::Present

01/16/07 05:13:40 PM Initializing DX9 BackBuffers...

01/16/07 05:14:14 PM XUScriptHelper->Creating Script Engine (JScript). . .

01/16/07 05:16:34 PM ERROR: Memory Leak Detected! All DX9Device Objects not released.

01/16/07 05:16:40 PM Uninitializing XUnleashed. . .

01/16/07 05:16:40 PM ERROR: Failed to free memory. Memory Leak Detected.

01/16/07 05:16:40 PM ERROR Code: Cannot create a file when that file already exists.

Any idea? I have a GeForce 7600 GS PCI-E on that puter. What am I missing?[/quote]

Posted: January 16th, 2007, 2:28 pm

Quote

Tault_admin

Total Posts: 29972
Joined: November 9th, 2002, 9:57 am

administrator

Sent to a tech reply may be a tad longer than usual due to the fact 3 of our main techs are sick atm

Posted: January 17th, 2007, 4:25 am

Quote

un0riginal

Total Posts: 123
Joined: November 20th, 2006, 4:39 am

floridasmb2 .. can you run the dx8 and dx9 tests on the 2nd computer?

Posted: January 17th, 2007, 5:06 am

Quote

floridasmb2

Yea, they both work fine.

In 800X600 DX9 runs at 284 FPS. It also gives the factors : X8R8G8B8 (D16) HAL (pure hw vp) : NVidia Geforce 7600 GS.

In 800X600 DX8 runs at 374 FPS. (D16) HAL (pure hw vp) : NVidia Geforce 7600 GS.

Also, Xunleashed I have running with all the defaults for EQ2 checked. Same as my first puter.

Auto Update Plugins
Display Logo
Use Random Filenames
Hook DX 8
Hook DX 9
That is everything that is checked.

Posted: January 17th, 2007, 6:36 am

Quote

floridasmb2

Dangit, what the hell is going on? I must be doing something wrong.

Last night I completely reformatted both my puters and reinstalled everything from scratch cause it has been a long time.

Now, I am getting the EXACT same error message on my first computer as on this one and they are completely seperate from each other. I must be missing something very obvious but I swear I did everything EXACTLY the same when it was running good. I even saved my EQ2harvester.ini from when it was working perfect and that didn't even work! On the other computer I have a Radeon X1600. I know on both puters I have the latest drivers and the newest direct X installed as well.

What s going on, i am baffled!

Posted: January 20th, 2007, 8:11 pm

Quote

floridasmb

...

Last edited by Guest on January 20th, 2007, 11:03 pm, edited 1 time in total.

Posted: January 20th, 2007, 8:51 pm

Quote

seyden

now first off your being rediculous. you posted 2 tiems yesterday and now today your stating you want your money back and stuff. and to report them to teh BBB and to give them a bad feedback to paypal. Because your having an issue that you cant figure out when others have it working just fine ?

since your teh one who cant get it to work have you figured also since this is a WEEKEND and maybe tehy dont work or look here over teh weekend ? and I believe I also read somewhere here today taht 3 of their techs are sick. also the programs on here are written alot by individual peopel bot by a company .... hmm isnt there a disclaimer somewhere ?? sould have sworn there was once... oh welll... oh and look at teh radar forum you knwo the one where everyone keeps saying they have issues with it pulling to the lower left corner.... been going on for awhile... Wyvern has a real job .. he as far as I know is not paid by tault. and as far as I was under teh impression is that this is basically a colaberation of programs and scripts people have writen to share with others and that none of these except teh Xhume client and server were writen by the Tault. All they do is host these in a central location for others.

hmmm guess I need to report google to teh better business bureau since my search on how to destroy all life in less than a second failed. NOT

Now that I am done stateing how silly that sounded back to yoru issue

Ok, now, when I run Xunleashed and get the lil scripts window up while playing EQ2 and select makepath option and then click start.... it shows the famous : Script Running Press F12 to stop and just sits there. I let is sit for 15 mins and nothing. I have used all the default options and have alos tried it with use compatibility mode and without. Neither worked, both times just sat there doing nothing. I tried running harvester and makepath and neither worked.

have you tried other resolutions? reason I ask is because even though I had teh game running in one resolution my computer display was set for another. after a bit on adjusting I found teh correct setting I needed and it started working. Also do you get any of teh scripts to run even the mouse demo because if that wont work then neiother will harvester

Posted: January 20th, 2007, 9:01 pm

Quote

seyden

01/16/07 05:13:33 PM WARNING: Requested DirectX9 Screen Format (15) may not be compatable with XUnleashed.

01/16/07 05:13:33 PM Contact XU to have them add this format!!!

01/16/07 05:13:34 PM FOUND: Direct3D9::CreateDevice()

01/16/07 05:13:34 PM DETECTED: Direct3DDevice9 Reset

01/16/07 05:13:34 PM WARNING: Requested DirectX9 Screen Format may be incompatable with XUnleashed.

01/16/07 05:13:34 PM FOUND: Direct3DDevice9::Present

01/16/07 05:13:34 PM Initializing DX9 BackBuffers...

01/16/07 05:13:40 PM DETECTED: Direct3DDevice9 Reset

01/16/07 05:13:40 PM WARNING: Requested DirectX9 Screen Format may be incompatable with XUnleashed.

01/16/07 05:13:40 PM FOUND: Direct3DDevice9::Present

note this states your DirectX9 Screenformat is not compatible
what resolution are you using for teh game and what is your desktop resolution set to?[/quote]

Who is online
Users browsing this forum: No registered users and 47 guests

EQ2 and Harvester 1.0 - Updated Howto guide : EverQuest 2 Premium Discussions