HBMakePath need help to get it to work. : EverQuest 2 Premium Discussions

hi all,

can someone tell me how to set up HBMakePath.

thanks in advance

----------------------------------------

thanks guys --

i figure it out -- i actually put the files in the wrong folder --

woops -- either way thanks for the help

It is very simple, there is a key you press when you get to the waypoint you want to assign and there is a + & - key you press to adjust the radius you want to search in from that waypoint.

So say you get to the point you need a waypoint at and you want the search radius to be 60 you would stop at the point press the "+" key till the little yellow text says 60 then hit the key to assign the data.

ATM I am at work so I don't have access to what the keys are but it tells you on the little yellow text. Play with it and view the file, you will understand it is very simplistic.

Loraik

Yes the on screen yellow text explains it all, but from memory I am pretty sure the keys are:

Home - set waypoint
End - Set direct waypoint
Delete - end script
pageup - increase waypoint search radius
pagedown - decrease waypoint search radius

hope this helps