EQ2 UltraBot 3.x Hunter, Buff and Harvest bot, Discussion : EverQuest 2 Nerfed Info

simpatico wrote:Thanks, ill see what i can do to fix that. Any idea's why the target-previous gets put in and not the target_previous at certain times while the bot is running?? Actually I don't even understand why its typing it at all.. I have the target previous key set in EQ to the same key it is in the .ini file. Should't it just press the button per say.. and not type it on my screen in the chat?

I will check that.

Thanks slam.. I believe the issue was of my own doing.. It seems there is no default key for target previous in the bot program, instead it has the ~ key.. which appeared to me as the programmed key, so i set eq to that key, which don't work.. I have now programmed the ] key as the target previous key and it works wonderfully.. I also got the loot to work by installing the eq2 interface map program and letting it set up the UI, then I copied the two files from the bot program UI into the eq2 interface map UI file.. Now i just update the eq2 interface map program, close it and start eq with xunleashed and i get the map from eq2 interface and the looting and program from xunleashed bot of yours..
Thanks for your help.

Hello!

What does the Computer Speed setting actually do for the running of the script?

megagamer2 wrote:Hello!

What does the Computer Speed setting actually do for the running of the script?

It set the different delay in script, like delay to press a key, delay between action etc.

slam666 wrote:

megagamer2 wrote:Hello!

What does the Computer Speed setting actually do for the running of the script?

It set the different delay in script, like delay to press a key, delay between action etc.

Thanks. So if I want to slow down the script (on a fast computer) I'd chose the "slow" option - then the script would run slower?

megagamer2 wrote:

slam666 wrote:

megagamer2 wrote:Hello!

What does the Computer Speed setting actually do for the running of the script?

It set the different delay in script, like delay to press a key, delay between action etc.

Thanks. So if I want to slow down the script (on a fast computer) I'd chose the "slow" option - then the script would run slower?

You wont see much of a difference in speed, its more in term of milisecond, its just to make sure slower computer react normaly.

I just installed 32a from using 31c and when I run the script it seems fine, but when I move on to my next mob the bot runs back to starting point like samespot is turned on and in offensivebot mode? I tried setting samespot=false but it still runs back and won't follow me. I never had to mess with this before in buffbot mode and assume I shouldn't need to now. anyone know what might be up?

everytime my bot pulls a mob he fights mob for a second then targets my caster and tries to fight him for a second then targets mob for a few more seconds. this repeats until the mob is dead. Does anyone have any ideas? and yes the targetting keys have been checked. Any help would be greatly appreciated

ok.. i have everything installed and working for about 3months now..now today i started having problems with it recognizing the char.ini on my tank, i have it in the right location havent messed around with it.
----------------------------------------------------------------------------
7/9/2006 2:47:59 AM: LoadCharINI() - INIFile <C>
7/9/2006 2:47:59 AM: *** ERROR: Problem with Char INI File (Either file not found, or Version section missing) - EXITING...
7/9/2006 2:47:59 AM: ERROR: Failed to Load Char INI File. Look for ERRORS above. ABORTING SCRIPT...
7/9/2006 2:47:59 AM: *** Script Complete!
-----------------------------------------------------------------------------

mdx360 wrote:ok.. i have everything installed and working for about 3months now..now today i started having problems with it recognizing the char.ini on my tank, i have it in the right location havent messed around with it.
----------------------------------------------------------------------------
7/9/2006 2:47:59 AM: LoadCharINI() - INIFile <C>
7/9/2006 2:47:59 AM: *** ERROR: Problem with Char INI File (Either file not found, or Version section missing) - EXITING...
7/9/2006 2:47:59 AM: ERROR: Failed to Load Char INI File. Look for ERRORS above. ABORTING SCRIPT...
7/9/2006 2:47:59 AM: *** Script Complete!
-----------------------------------------------------------------------------

Look for error in the log file, thee should be one or more.

ERROR: Failed to Load Char INI File. Look for ERRORS above. ABORTING SCRIPT...

I wonder if you can make the script abort sooner?

Ie after the first error, abort so it doesnt confuse with other errors after?

here is the whole log.
7/9/2006 2:45:06 AM:
7/9/2006 2:45:06 AM:
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: DEBUG LOG File Opened: C:\Documents and Settings\tank\Desktop\g\XUnleashedTest\scripts\EQ2_UltraBOT_DEBUG_LOG1.log
7/9/2006 2:45:06 AM: StartTimer(locTimer) SET: 1.0 seconds
7/9/2006 2:45:06 AM: StartTimer(locTimer) MS: 9,906.4
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *** UltraBot Script Starting!
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *** Script Version: 3.2
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *** Starting EQ2Service
7/9/2006 2:45:06 AM: EQ2Service Setup Complete!
7/9/2006 2:45:06 AM: ** Debug Level Set to 1 **
7/9/2006 2:45:06 AM: LoadINI() - INIFile <C>
7/9/2006 2:45:06 AM: Main INI File Version: 3.2
7/9/2006 2:45:06 AM: LoadCharINI() - INIFile <C>
7/9/2006 2:45:06 AM: *** ERROR: Problem with Char INI File (Either file not found, or Version section missing) - EXITING...
7/9/2006 2:45:06 AM: ERROR: Failed to Load Char INI File. Look for ERRORS above. ABORTING SCRIPT...
7/9/2006 2:45:06 AM: *** Script Complete!

mdx360 wrote:here is the whole log.
7/9/2006 2:45:06 AM:
7/9/2006 2:45:06 AM:
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: DEBUG LOG File Opened: C:\Documents and Settings\tank\Desktop\g\XUnleashedTest\scripts\EQ2_UltraBOT_DEBUG_LOG1.log
7/9/2006 2:45:06 AM: StartTimer(locTimer) SET: 1.0 seconds
7/9/2006 2:45:06 AM: StartTimer(locTimer) MS: 9,906.4
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *** UltraBot Script Starting!
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *** Script Version: 3.2
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *************************************
7/9/2006 2:45:06 AM: *** Starting EQ2Service
7/9/2006 2:45:06 AM: EQ2Service Setup Complete!
7/9/2006 2:45:06 AM: ** Debug Level Set to 1 **
7/9/2006 2:45:06 AM: LoadINI() - INIFile <C>
7/9/2006 2:45:06 AM: Main INI File Version: 3.2
7/9/2006 2:45:06 AM: LoadCharINI() - INIFile <C>
7/9/2006 2:45:06 AM: *** ERROR: Problem with Char INI File (Either file not found, or Version section missing) - EXITING...
7/9/2006 2:45:06 AM: ERROR: Failed to Load Char INI File. Look for ERRORS above. ABORTING SCRIPT...
7/9/2006 2:45:06 AM: *** Script Complete!

Ok send me your EQ2UltraBot.ini and char ini file by PM.

Make sure your "CharINIFile=" in the EQ2UltraBot.ini has the right char.ini listed in it.

Loraik

Hello all!

Thanks for a good script

I do however have a problem sometimes when running the script on 1 of my 3 computers. I have been trying to figure it out for myself, but I can't seem to make it work 100% so I am hoping for some input from you guys.

The problem is that the script sometimes makes the character in EQ2 go LD. On the two other computers I just set the Processor Affinity for EQ2 which makes the script run faster, but on this computer I don't get that option when pressing CTRL-ALT-DEL -> Task Manager. Instead I get the option to set Priority. I have tried to experiment with this option, but it doesn't seem to influence the LD-issue at all.

The computer having the LD problem has this setup:

Windows 2000 Pro
3.0 GHz Pentium4 Prescott 1 MB Cache.
Intel La Crosse, i865G Moterboard.
1,5 GB Dual Channel DDR RAM.
Radeon 9600 256MB RAM.

This setup should be able to run EQ2 and the script without problems...so why do I go LD on this computer?

All 3 computers share the same LAN and I DON'T go LD when not scripting on the computer.

Plz help me out guys