EQ2MegaBot’ v2.4 Released - Buff Bot AND HUNTER BOT! : EverQuest 2 Premium Discussions

Hi

I’m a new user and have just started a tank with a bot healer, I have managed to get it working with the tell commands (e.g., heal me - bot cast heal that are set up and follow etc). The problem I am having is when I ask the bot to assist the tank it seems to attack but does not cast the nuke I have set-up (smite in this cast) then after the fight it just keeps healing itself until I reset the script (f12) and start it again. Any ideas what I could be doing wrong???

Thx

Not without seeing the setup INI or a log file I can't tell anything without those. You can either PM them to me or email me at richyrich@toadmail.com and I"ll take a look at what is going on.

Rich

I may be a dumb monkey, but I can't figure this out. I couldn't find it anywhere else either, though I did not read every post on every thread.

I am getting an error because my log files are in the logs folder, not in individual server folders. Is there some way to fix this in the .ini? or is there some way to get eq2 to log into server folders?

Hmm - odd. When you turn on the /log manually, where does the log file go? It's always gone into the individual server's log for me. I wonder if something changed?? Anyone else having issues?

I don't have time to run it now, running out the door, but will look into it later.

I may be a dumb monkey, but I can't figure this out. I couldn't find it anywhere else either, though I did not read every post on every thread.

I am getting an error because my log files are in the logs folder, not in individual server folders. Is there some way to fix this in the .ini? or is there some way to get eq2 to log into server folders?

jacob428 - I think I know what maybe your issue... or at least I had a similar issue. My guess would be you have an AMD proccessor and have the auto-updates turned off so you can keep the radar working. Problem here is the EQ2 service updated and you need to get the update.

Last time wyv updated the service I had the same issue when trying to run megabot on my amd proccessor. I kept getting this error:

"** ERROR: Can't Open Chat Log - please verify that you have turned on logging in game at least once to create file with /log command"

Took me a bit to remember, I should update the eq2 sevice... and presto

richyrich";p="64614 wrote:Hmm - odd. When you turn on the /log manually, where does the log file go? It's always gone into the individual server's log for me. I wonder if something changed?? Anyone else having issues?

I don't have time to run it now, running out the door, but will look into it later.

All of my logs go into the /Everquest II/logs/ folder. I do not have individual server folders inside of that folder, just the logs for all my characters on all servers.


*EDIT*
Hmm, looks like I fixed it by turning the log off, then back on again. Going to try to run it and see how it goes

Ok, the log problem is fixed. Now I have another problem. Everything seems to work fine except the movement. The bot will target the mob and attack with the strings I put in, but he won't move to the mob, so none of the attacks hit. Any ideas?

Just got the 2nd account today and...

Yeah my bot won't move either it seems...it use to just move left and not loot until I figured out that the loot key was the default strafe left button. Any ideas?

mally42";p="64661 wrote:Just got the 2nd account today and...

Yeah my bot won't move either it seems...it use to just move left and not loot until I figured out that the loot key was the default strafe left button. Any ideas?

Did you guys replace the Turning code that I posted using the LEFT/RIGHT keys? A new version with lots of fixes will be out in the next 24-48 hours.

Also make sure your RunLockSTR=INSERT is set to your auto run key.
; Found under -> Options/Controls/Movement Keys/Auto Run(toggle)

Rich

oh - and loot will work a LOT better in the new version - it knows when there is loot to loot, goes and finds it, etc. pretty cool to watch!

Wyv,

Did something change with how dead things are reported? I was finishing up my logic for smart looting, and dead things use to come up as -1 level, which made it easy to find them. Now they are coming up as normal alive level, and I can't tell if they are dead things to loot or other objects.

Can you look at it for me? If you had a function that returned IsAlive() that would work too, just something so I can tell where to find the lootable mobs.

Thanks,
Rich

Yeah Rich I did change the code as you discribed and the Numlock is set to auto-run. I actually tried it both the original code and the new code. Same. In the box it seems to bring up a run to and then it stops and checks for aggro but the bot doesn't move.

A new version with lots of fixes will be out in the next 24-48 hours.

/begins to twitch

Can't wait! great work btw

Send me a log - something isnt' right.

rich i'm getting errors on a couple of strings i set up. and i can't seem to figure out why. i'll cut and paste them here see if anyone can tell me what i'm doing wrong
Is what i have set.
BuffSequenceSTR=qb2,Thundering Fists,5,1s,9999s,qb4,Fiery Fists,3,3s,9999s,qb4,Intimidating Orders,5,2s,600s,qb4,Call to Arms,6,2s,630s

Is the error in log
5/14/2005 1:37:39 PM: LoadINIVariable(QuickBarSetup, BuffSequenceSTR) = [qb2,Thundering Fists,5,1s,9999s,qb4,Fiery Fists,3,3s,9999s,qb4,Intimidating Orders,5,2s,600s,qb4,Call to Arms,6,2s,630s]
5/14/2005 1:37:39 PM: Sequence LOAD [BuffSequence]
5/14/2005 1:37:39 PM: KeyToTranslate (qb)=<2> Code=<50>
5/14/2005 1:37:39 PM: StartTimer(Action Recast Timer: Thundering Fists) SET: -1.0 seconds
5/14/2005 1:37:39 PM: KeyToTranslate (ActionClass.Load(Thundering Fists))=<5> Code=<53>
5/14/2005 1:37:39 PM: StartTimer(Action Recast Timer: qb4) SET: -1.0 seconds
5/14/2005 1:37:39 PM: *** ERROR: TranslateKey() Invalid key String (ActionClass.Load(qb4)) -> <Fiery Fists>
5/14/2005 1:37:39 PM: ERROR: Invalid Key to Translate - check sequence out
5/14/2005 1:37:39 PM: ERROR loading ActionClass - check sequence out

and the second error i'm getting
Is string i have in
CombatResponseSequenceSTR=You trigger a starter chain,qb1,Sarko's Deadly Hook,5,1s,10s,You trigger a starter chain,qb1,Power Strike,1s,30s,You triggered Crushing Anvil,qb1,Taunting Slap,6,1s,8s,You triggered Sky Cleave,qb1,Taunting Slap,6,1s,8s,You triggered Heroic Armor,qb1,Taunting Slap,6,1s,8s
(Note i've tried several versions of this string.. with TARGET placed at end with and without a comma after it.. and at the ened of each key set up. nothing worked)

here is the error from log
5/14/2005 1:37:39 PM: LoadINIVariable(QuickBarSetup, ResponseSequenceSTR) = []
5/14/2005 1:37:39 PM: RESPONSE Sequence LOAD [ResponseSequenceSTR]
5/14/2005 1:37:39 PM: ResponseSequenceSTR: Nothing in sequence to load
5/14/2005 1:37:39 PM: Response Sequence [ResponseSequenceSTR] is not active yet
5/14/2005 1:37:39 PM: LoadINIVariable(QuickBarSetup, CombatResponseSequenceSTR) = [You trigger a starter chain,qb1,Sarko's Deadly Hook,5,1s,10s,You trigger a starter chain,qb1,Power Strike,1s,30s,You triggered Crushing Anvil,qb1,Taunting Slap,6,1s,8s,You triggered Sky Cleave,qb1,Taunting Slap,6,1s,8s,You triggered Heroic Armor,qb1,Taunting Slap,6,1s,8s]
5/14/2005 1:37:39 PM: RESPONSE Sequence LOAD [CombatResponseSequenceSTR]
5/14/2005 1:37:39 PM: KeyToTranslate (qb)=<1> Code=<49>
5/14/2005 1:37:39 PM: ERROR: Invalid castOnWho

Here it is with the TARGET placed in each.
5/14/2005 1:58:13 PM: RESPONSE Sequence LOAD [ResponseSequenceSTR]
5/14/2005 1:58:13 PM: ResponseSequenceSTR: Nothing in sequence to load
5/14/2005 1:58:13 PM: Response Sequence [ResponseSequenceSTR] is not active yet
5/14/2005 1:58:13 PM: LoadINIVariable(QuickBarSetup, CombatResponseSequenceSTR) = [You trigger a starter chain,qb1,Sarko's Deadly Hook,5,1s,10s,TARGET,You trigger a starter chain,qb1,Power Strike,1s,30s,TARGET,You triggered Crushing Anvil,qb1,Taunting Slap,6,1s,8s,TARGET,You triggered Sky Cleave,qb1,Taunting Slap,6,1s,8s,TARGET,You triggered Heroic Armor,qb1,Taunting Slap,6,1s,8s,TARGET]
5/14/2005 1:58:13 PM: RESPONSE Sequence LOAD [CombatResponseSequenceSTR]
5/14/2005 1:58:13 PM: KeyToTranslate (qb)=<1> Code=<49>
5/14/2005 1:58:13 PM: StartTimer(Action Recast Timer: Sarko's Deadly Hook) SET: -1.0 seconds
5/14/2005 1:58:13 PM: KeyToTranslate (ActionClass.Load(Sarko's Deadly Hook))=<5> Code=<53>
5/14/2005 1:58:13 PM: KeyToTranslate (qb)=<1> Code=<49>
5/14/2005 1:58:13 PM: ERROR: Invalid castOnWho

So if anyone knows what it is i'm missing please let me know... i feel like i've almost got my hunter bot rdy to go.. and i can't wait to have it functioning.

Taz- you can't use mutiple quick bars in anything except response and combat response seq.

and in the combat repsonse seq and response seq you missed a hot key..

trigger a starter chain,qb1,Power Strike,1s,30s,

and

Power Strike,1s,30s,TARGET

hope that helps