 |
| Author |
Everquest 2 and Harvester Step-by-Step![]() |
antiliphe
In Training
Regular Member
Joined: 16 Mar 2005
Posts: 25
11 TUBucks
|
 Posted: Mon Mar 21, 2005 6:10 am Post subject:
 Everquest 2 and Harvester Step-by-Step |
|
1. Register for the site and become a Premium member HERE.
2. Download the Xunleashed Client from HERE.
Notice: It's much easier if you put this file under one folder, an example would be C:/Xunleashed if you are usings windows. After you try to run the file it will extract lots of other files in the same directory.
3. Run the file if should come up and try to connect to the server to check for registration and updates.(Notice: If you have a router, firewall or antivirus the program might have trouble connecting. Try Turning off firewalls and antivirus' if the program does not start up or gives you a 12001 error. Something the server can be down and all you have to do is wait.)
4. Hit the launch button. Now go to the REGISTRATION tab at the top and type in the info you should have recieved when you signed up.
5. Now go to the OPTIONS tab at the top and select EverQuest 2.
Try not to change any options, leave it at the defaults.
6. Now minimize it and download the Harvest bot/Script from HERE. Now uncompress the file and COPY AND PASTE the
"EQ2Harvest" VBscript file and the "EQ2Harvest" folder into
"C:/Xunleashed/Scripts"
4. Then download the EQ2 Service by WyvernX from HERE. Put it on your Desktop and install it.
5. Next you edit the "EQ2Harvest" VBscript file that should be under "C:/Xunleashed/Scripts/" right click on it and click "edit."
Then scroll scroll down until you see something like this:
| Code: |
Resources = array( _
array("1", "oasis shrubbery"), _
array("2", "Wind swept rock"), _
array("1", "desert roots"), _
array("3", "armadillo den"), _
array("2", "cloven ore"), _
array("1", "oasis fungi") _
array("4", "?") _
|
NOW the numbers next to the harvest item/root/rock/den etc. is the number that should be on your "Hot Bar" buttons usually the buttons you attack with. If you use more the one hotbar make sure you set the correct abilities on you PRIMARY hotbar. You set up the abilities using the icons from the Knowledge book by hitting "k" and dragging and dropping. Make sure the abilities correspond to the item you are harvesting. For example. An oasis shrubbery would need the "gathering" ability. According to the configuration above it would be in the first button slot 1.
Wind swept rock would be "mining" so according to the top configuration it would have to be put under slot 2.
A real cool thing is that you can also set up the bot to "harvest" the "?" by setting up your collecting button In this example the "collecting" button should be put under slow 4.
You can also make the bot harvest the things you want or leave them blank like this:
Resources = array( _
array("1", "oasis shrubbery"), _
array("2", ""), _
array("4", "?") _
This config would only harvest oasis shrubbery and ?.
Save the config you want and close the notepad.
5. Restart Xunleashed then click the "Play" button and it should automatically launch EQ2. Login using your account info. Select your character, Start playing.
6. Now put your mouse on the bottom border of EQ2 window, since it should have started in windowed mode. A little menu bar should pop open. Select the Harvester button and it should bring up a little window. If for some reason you cannot click on the buttons or menu to start the bot try hitting CTRL+O that should bring up the OPTIONS menu, move the options menu UNDER the Harvestor window. You should now be able to start the bot. Watch your bot harvest all those items without having to put in all the dreadfull hours! 
If you guys have any questions Just send me a PM, If you wanna play together im on the Grobb server under the character name Evergod  Sorry for any wrong info I might have provided hope this helps someone though. This is how I got mine up and running, If I missed anthing pleave make sure to tell me.
|
|
Back to top
|
|
 |
turnip7
Script Kiddy
Regular Member
Joined: 30 Apr 2005
Posts: 4
0 TUBucks
|
| Posted: Sun May 01, 2005 2:24 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
Ok i have followed your instructions and can get a little bar to pop at bottom of screen whcih has differant XU options but no Harvest option ?
I have these options EQ2 Crafter XU triggers XU Macros XU scripts
|
|
Back to top
|
|
|
turnip7
Script Kiddy
Regular Member
Joined: 30 Apr 2005
Posts: 4
0 TUBucks
|
| Posted: Sun May 01, 2005 2:38 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
Ok worked out how to get harvester script up but now i am getting an error message and eq crashes ?
|
|
Back to top
|
|
|
wyvernx
Site Moderator
Premium Member
Joined: 01 May 2004
Posts: 8265
8413 TUBucks
|
| Posted: Mon May 02, 2005 6:23 am Post subject:
|
|
make sure you uncheck the tcpip packet sniffer plugin
also remove the reg handler plugin if it shows up.
_________________
Use Search first, ask questions later!
|
|
Back to top
|
|
|
turnip7
Script Kiddy
Regular Member
Joined: 30 Apr 2005
Posts: 4
0 TUBucks
|
| Posted: Mon May 02, 2005 6:09 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
Thx for the help Wyv and Anti i got the harvester working . Wht did i go and do then =( changed the setings in script for what nodes it should mine gather etc from and now no joy at all wont harvest squat. So do i need to reinstall something or ? again any advice is v helpful.
Turnip7
|
|
Back to top
|
|
|
aramonia
Script Kiddy
Regular Member
Joined: 30 Jan 2005
Posts: 2
0 TUBucks
|
| Posted: Tue May 03, 2005 10:31 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
whenever I load XU, i get the bar at the bottom..i get the crafter bot and the others..but no harvesting bot??? please advise =)
btw, i am not that great with programming..so try and spell it out a little bit for me..i followed the directions but for some reason can't get the harvest bot option to pop up
|
|
Back to top
|
|
|
nordic stolz
In Advanced Training
Regular Member
Joined: 16 May 2005
Posts: 57
1205 TUBucks
|
| Posted: Wed Jun 08, 2005 10:09 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
I too cannot get the harvester button to appear... followed you're directions to a T.
|
|
Back to top
|
|
|
casper
Script Kiddy
Regular Member
Joined: 10 Jun 2005
Posts: 8
2 TUBucks
|
| Posted: Wed Jun 15, 2005 8:39 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
I also can not get the harvester button to show?
|
|
Back to top
|
|
|
redman
In Advanced Training
Premium Member
Joined: 04 Mar 2005
Posts: 93
0 TUBucks
|
| Posted: Thu Jun 16, 2005 1:58 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
The harvester is a script, not a plugin.
Steps:
- Click on the script button which is where you run ALL scripts from.
- Bring up the (P)ersona window behind the script window so the buttons work.
- Click on the sideways arrows on the scripting window to switch scripts
- Select Mouse demo and START that script. If that doesn't work, you have deeper problems.
- Click more on the sideways arrows until you see the harvester script (whichever one you have installed, presuming you installed it correctly.)
RedMan
|
|
Back to top
|
|
|
casper
Script Kiddy
Regular Member
Joined: 10 Jun 2005
Posts: 8
2 TUBucks
|
| Posted: Thu Jun 16, 2005 6:30 pm Post subject:
Re: Everquest 2 and Harvester Step-by-Step |
|
Got the mouse script to work.
So I moved onto the harvest bot, and click run. It does nothing but just stands? I changed the keys in the ini file to match what it said, and still it does not move. Then when I try to stop the script it will not stop, with f12 nor hitting the stop button.
On a different token, anyone know if the radar is working?
|
|
Back to top
|
|
|
a5m0d1
Script Kiddy
Regular Member
Joined: 11 Jul 2005
Posts: 1
0 TUBucks
|
| Posted: Mon Jul 11, 2005 5:50 pm Post subject:
|
|
Okay i can change the script by sticking somthing behind it like my Journal but the text is almost un readable and when I sart the macro nothing happens. I have edited everthing in the ini file I can find. I even tried it in multipull zones
Oh it says one script running but the del key wont end it
|
|
Back to top
|
|
|
prahana
Script Kiddy
Regular Member
Joined: 15 Feb 2005
Posts: 7
0 TUBucks
|
| Posted: Tue Jul 19, 2005 8:30 pm Post subject:
|
|
| Quote: |
5. Next you edit the "EQ2Harvest" VBscript file that should be under "C:/Xunleashed/Scripts/" right click on it and click "edit."
Then scroll scroll down until you see something like this:
Code:
Resources = array( _
array("1", "oasis shrubbery"), _
array("2", "Wind swept rock"), _
array("1", "desert roots"), _
array("3", "armadillo den"), _
array("2", "cloven ore"), _
array("1", "oasis fungi") _
array("4", "?") _
|
Ok... I've looked and looked. I can't find any text that resembles this, nor do I have a file called "EQ2 Harvest"
The files in my scripts folder are called:
HarvestBot_v401
HarvestBot_Classes_401
HarvestBot_globals_401
HarvestBot_INI_401
HarvestBot_functions_401
HarvestBot_Harvest_401
HarvestBot_Navigate_401
The closest text I can find with "array" in it is:
Process = True
HarvestResults = Array( _
"You failed to", _
"You mine", _
"You gather", _
"You forest", _
"You acquire", _
"You found", _
"You fish" _
)
and:
RareItemList = Array( _
"yarrow", _
"Copper Cluster", _
"Rough Lapis Lazuli", _
"Bronze Cluster", _
"Severed Alder", _
" a Low Quality", _
"Sisal Strands", _
"severed bone", _
"Silver Rluster", _
"Rough Coral", _
"Blackened Iron Cluster", _
"Bone Wood", _
" a Average Quality", _
" an Average Quality", _
"Dandelion Fiber", _
"Palladium Cluster", _
"Rough Jasper", _
" Steel Cluster", _
"Severed Fir", _
" a Medium Quality", _
"Oak Roots", _
"Ruthenium Cluster", _
"Rough Opal", _
"Feysteel Cluster", _
"Severed Oak", _
" a High Quality", _
"Figwart Roots", _
"Rhodium Cluster", _
"Rough Ruby", _
"Ebon Cluster", _
"Severed Cedar", _
" a Superb Quality" _
)
I'm a noob. If I'm missing something obvious, please forgive me. I'm trying!
Thanks,
~P~
|
|
Back to top
|
|
|
antiliphe
In Training
Regular Member
Joined: 16 Mar 2005
Posts: 25
11 TUBucks
|
| Posted: Sun Aug 07, 2005 9:15 pm Post subject:
|
|
Ok. Do any of you guys still need help?
I took a break off EQ3 for like 3-4 months
lol 
I'll Try and update the tutorial later on. 
|
|
Back to top
|
|
|
thewatcher
Lifetime Member (Scripting)
Premium Member
Joined: 30 Jan 2005
Posts: 369
156 TUBucks
|
| Posted: Wed Aug 10, 2005 4:51 pm Post subject:
|
|
Ok, I started readin this and thought, very cool... then I thought..wait, I thought this was for HarvestBot, it's starting to sound like Harvester, then I realized that this is for the Unused original harvester and that the links don't work... should this be updated or the sticky bit removed?
_________________
Author/Maintainer of:
HarvestBot 2.xx and 3.xx versions
BuffBot
HBMakePath
BotBase (Jscript)
EQ2Harvester
IniConfigurator
TMConfig
Yet to come:
a fighter bot.
Please Read: How to ask questions the Smart way.
|
|
Back to top
|
|
|
thewatcher
Lifetime Member (Scripting)
Premium Member
Joined: 30 Jan 2005
Posts: 369
156 TUBucks
|
| Posted: Fri Aug 19, 2005 5:04 pm Post subject:
|
|
Hello? This post is really very useless and could safely be deleted, could it at least be UNstickied?
_________________
Author/Maintainer of:
HarvestBot 2.xx and 3.xx versions
BuffBot
HBMakePath
BotBase (Jscript)
EQ2Harvester
IniConfigurator
TMConfig
Yet to come:
a fighter bot.
Please Read: How to ask questions the Smart way.
|
|
Back to top
|
|
|
|
|
 |
Forum index » EverQuest 2 » EQ2Ultrabot Hunter/Buff/Harvest/Crafting Bot all in one
