EQ2 UltraBot 3.x Hunter, Buff and Harvest bot, Discussion : EverQuest 2 Nerfed Info - Page 11

26/05/2006 07:25:34:
26/05/2006 07:25:34:
26/05/2006 07:25:34: *************************************
26/05/2006 07:25:34: *************************************
26/05/2006 07:25:34: *************************************
26/05/2006 07:25:34: DEBUG LOG File Opened: C:\XUnleashedTest\scripts\EQ2_UltraBOT_DEBUG_LOG3.log
26/05/2006 07:25:34: StartTimer(locTimer) SET: 1.0 seconds
26/05/2006 07:25:34: StartTimer(locTimer) MS: 26,734.6
26/05/2006 07:25:34: *************************************
26/05/2006 07:25:34: *** UltraBot Script Starting!
26/05/2006 07:25:34: *************************************
26/05/2006 07:25:34: *** Script Version: 3.1
26/05/2006 07:25:34: *************************************
26/05/2006 07:25:34: *************************************
26/05/2006 07:25:34: *** Starting EQ2Service
26/05/2006 07:25:34: EQ2Service Setup Complete!
26/05/2006 07:25:34: ** Debug Level Set to 1 **
26/05/2006 07:25:34: LoadINI() - INIFile <C>
26/05/2006 07:25:34: Main INI File Version: 3.1
26/05/2006 07:25:34: LoadCharINI() - INIFile <C>
26/05/2006 07:25:34: Char INI File Version: 3.1
26/05/2006 07:25:34: LoadINIVariable(Version, TestMode) = [0]
26/05/2006 07:25:34: LoadINIVariable(BasicCharSetup, CharRole) = [BUFFBOT]
26/05/2006 07:25:34: LoadINIVariable(BasicCharSetup, EQ2Dir) = [c:\Program Files\Sony\Everquest II\]
26/05/2006 07:25:34: LoadINIVariable(BasicCharSetup, EQ2Server) = [Runnyeye]
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, BeforeCombatSequence1STR) = []
26/05/2006 07:25:34: Sequence LOAD [BeforeCombatSequence1]
26/05/2006 07:25:34: BeforeCombatSequence1: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [BeforeCombatSequence1] is not active yet
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, InitialCombatSequence1STR) = []
26/05/2006 07:25:34: Sequence LOAD [InitialCombatSequence1]
26/05/2006 07:25:34: InitialCombatSequence1: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [InitialCombatSequence1] is not active yet
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, UsingRangeToPull) = [FALSE]
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, PerMobCombatSequence1STR) = []
26/05/2006 07:25:34: Sequence LOAD [PerMobCombatSequence1]
26/05/2006 07:25:34: PerMobCombatSequence1: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [PerMobCombatSequence1] is not active yet
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, CombatSequence1STR) = [qb1,Nuke,7,1s,10s,]
26/05/2006 07:25:34: Sequence LOAD [CombatSequence1]
26/05/2006 07:25:34: KeyToTranslate (qb)=<1> Code=<49>
26/05/2006 07:25:34: StartTimer(Action Recast Timer: Nuke) SET: -1.0 seconds
26/05/2006 07:25:34: StartTimer(Action Recast Timer: Nuke) MS: 26,734.9
26/05/2006 07:25:34: KeyToTranslate (ActionClass.Load(Nuke))=<7> Code=<55>
26/05/2006 07:25:34: ERROR: Bad Sequence: QUICKBAR WRONG
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, CombatSequence2STR) = []
26/05/2006 07:25:34: Sequence LOAD [CombatSequence2]
26/05/2006 07:25:34: CombatSequence2: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [CombatSequence2] is not active yet
26/05/2006 07:25:34: Sequence LOAD [CombatSequence2]
26/05/2006 07:25:34: KeyToTranslate (qb)=<1> Code=<49>
26/05/2006 07:25:34: StartTimer(Action Recast Timer: Nuke) SET: -1.0 seconds
26/05/2006 07:25:34: StartTimer(Action Recast Timer: Nuke) MS: 26,734.9
26/05/2006 07:25:34: KeyToTranslate (ActionClass.Load(Nuke))=<7> Code=<55>
26/05/2006 07:25:34: ERROR: Bad Sequence: QUICKBAR WRONG
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, AfterCombatSequence1STR) = []
26/05/2006 07:25:34: Sequence LOAD [AfterCombatSequence1]
26/05/2006 07:25:34: AfterCombatSequence1: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [AfterCombatSequence1] is not active yet
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, HealSequenceSTR) = [qb1,Salve,-,1s,5s,]
26/05/2006 07:25:34: Sequence LOAD [HealSequence]
26/05/2006 07:25:34: KeyToTranslate (qb)=<1> Code=<49>
26/05/2006 07:25:34: StartTimer(Action Recast Timer: Salve) SET: -1.0 seconds
26/05/2006 07:25:34: StartTimer(Action Recast Timer: Salve) MS: 26,734.9
26/05/2006 07:25:34: KeyToTranslate (ActionClass.Load(Salve))=<-> Code=<189>
26/05/2006 07:25:34: ERROR: Bad Sequence: QUICKBAR WRONG
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, HealPercentSTR) = [70]
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, HealSequence2STR) = []
26/05/2006 07:25:34: Sequence LOAD [HealSequence2]
26/05/2006 07:25:34: HealSequence2: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [HealSequence2] is not active yet
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, HealPercent2STR) = [70]
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, HealOthersSTR) = [TRUE]
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, StopFightingPowerSTR) = [0]
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, GroupHealSequenceSTR) = []
26/05/2006 07:25:34: Sequence LOAD [GroupHealSequence]
26/05/2006 07:25:34: GroupHealSequence: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [GroupHealSequence] is not active yet
26/05/2006 07:25:34: LoadINIVariable(QuickBarSetup, PetHealSequenceSTR) = []
26/05/2006 07:25:34: Sequence LOAD [PetHealSequence]
26/05/2006 07:25:34: PetHealSequence: Nothing in sequence to load
26/05/2006 07:25:34: Sequence [PetHealSequence] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, PowerTriggerSTR) = [90]
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, PowerSequence1STR) = []
26/05/2006 07:25:35: Sequence LOAD [PowerSequence1]
26/05/2006 07:25:35: PowerSequence1: Nothing in sequence to load
26/05/2006 07:25:35: Sequence [PowerSequence1] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, BuffSequenceSTR) = []
26/05/2006 07:25:35: Sequence LOAD [BuffSequence]
26/05/2006 07:25:35: BuffSequence: Nothing in sequence to load
26/05/2006 07:25:35: Sequence [BuffSequence] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, PetBuffSequenceSTR) = []
26/05/2006 07:25:35: Sequence LOAD [PetBuffSequence]
26/05/2006 07:25:35: PetBuffSequence: Nothing in sequence to load
26/05/2006 07:25:35: Sequence [PetBuffSequence] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, AfterRessSequenceSTR) = []
26/05/2006 07:25:35: Sequence LOAD [AfterRessSequence]
26/05/2006 07:25:35: AfterRessSequence: Nothing in sequence to load
26/05/2006 07:25:35: Sequence [AfterRessSequence] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, AfterHarvestSequenceSTR) = []
26/05/2006 07:25:35: Sequence LOAD [AfterHarvestSequence]
26/05/2006 07:25:35: AfterHarvestSequence: Nothing in sequence to load
26/05/2006 07:25:35: Sequence [AfterHarvestSequence] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, GroupBuffSequenceSTR) = []
26/05/2006 07:25:35: Sequence LOAD [GroupBuffSequence]
26/05/2006 07:25:35: GroupBuffSequence: Nothing in sequence to load
26/05/2006 07:25:35: Sequence [GroupBuffSequence] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, ResponseSequenceSTR) = []
26/05/2006 07:25:35: RESPONSE Sequence LOAD [ResponseSequenceSTR]
26/05/2006 07:25:35: ResponseSequenceSTR: Nothing in sequence to load
26/05/2006 07:25:35: Response Sequence [ResponseSequenceSTR] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, CombatResponseSequenceSTR) = []
26/05/2006 07:25:35: RESPONSE Sequence LOAD [CombatResponseSequenceSTR]
26/05/2006 07:25:35: CombatResponseSequenceSTR: Nothing in sequence to load
26/05/2006 07:25:35: Response Sequence [CombatResponseSequenceSTR] is not active yet
26/05/2006 07:25:35: LoadINIVariable(QuickBarSetup, HealPetAt) = [80]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, TargetFriendlySTR) = [F1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, TargetPCSTR) = [F7]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, AttackSTR) = [`]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, ConsiderSTR) = [v]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, TargetMonsterSTR) = [TAB]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, GetSTR) = [f]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, RunLockSTR) = [NUMLOCK]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, ExitScriptSTR) = [MBUTTON]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, PauseToggleSTR) = [INSERT]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, SprintQB) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, SprintSTR) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, RessQB) = []
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, RessSTR) = []
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, GetAllMastersSTR) = [DEL]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, TurnLeftSTR) = [a]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, TurnRightSTR) = [d]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, StrafeLeftSTR) = [z]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, StrafeRightSTR) = [c]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, AssistSTR) = [.]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, TargetPreviousSTR) = []
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, CloseGameWindowSTR) = [\]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, InitChatSTR) = [[]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, FollowQB) = []
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, FollowSTR) = []
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, PetQBar) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, PetAttackSTR) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, PetBackOffSTR) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, PetGuardMeSTR) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, PetGuardYouSTR) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, PetSummonSTR) = [1]
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, EmergencyQB) = []
26/05/2006 07:25:35: LoadINIVariable(OtherMappedKeys, EmergencyKEY) = []
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, Hunting) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, FightBack) = [TRUE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, QuitTimer) = [0]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, TargetLoopTime) = [2]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, TurnForTarget) = [TRUE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, PercentHealth) = [100]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, PercentPower) = [80]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, GroupPercentPower) = [80]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, ValidMasters) = [Teren]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, ValidLeader) = [Teren]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, ValidFollowers) = []
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, SearchForNames) = []
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, LogOutWhenYouDie) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, IdleTimer) = [30]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, LogOutIfNotRess) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, RessMeIfDie) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, RessMaxTime) = [5]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, MaxTargettingDistance) = [30]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, PullToSafeSpot) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, PullWithPet) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, HavePet) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, PetName) = []
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, TypePetPull) = [PETPULLMOBHEALTH]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, TypePetPullSTR) = [99]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, EmergencyHealth) = [0]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, PetHealth) = [90]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, PauseAfterThisManyKills) = [50]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, DoWeStrafe) = [TRUE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, RandomRunMode) = [SAMESPOT]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, RandomRunRange) = [0]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, LootMonster) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, LootChest) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, FollowLeaderAtStart) = [TRUE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, LottoEnter) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, StopLootingWhenFull) = [FALSE]
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, IgnoreMobList) = []
26/05/2006 07:25:35: LoadINIVariable(FightingVariables, LookForMonsterTime) = [5]
26/05/2006 07:25:36: LoadINIVariable(FightingVariables, FightNonAggro) = [FALSE]
26/05/2006 07:25:36: LoadINIVariable(FightingVariables, FightNamed) = [FALSE]
26/05/2006 07:25:36: LoadINIVariable(FightingVariables, BuffbotMoveToTarget) = [TRUE]
26/05/2006 07:25:36: LoadINIVariable(Commands, BuffMeSTR) = [hit me up]
26/05/2006 07:25:36: LoadINIVariable(Commands, GroupHealSTR) = [group heal]
26/05/2006 07:25:36: LoadINIVariable(Commands, ResMeSTR) = [bring me back]
26/05/2006 07:25:36: LoadINIVariable(Commands, AssistMeSTR) = [help me please]
26/05/2006 07:25:36: LoadINIVariable(Commands, FollowMeSTR) = [fol]
26/05/2006 07:25:36: LoadINIVariable(Commands, StopFollowingSTR) = [stop]
26/05/2006 07:25:36: LoadINIVariable(Commands, LogOutSTR) = [log out please]
26/05/2006 07:25:36: LoadINIVariable(Commands, HealYourselfSTR) = [Give yourself some lovin]
26/05/2006 07:25:36: LoadINIVariable(Commands, StandDownSTR) = [stand down]
26/05/2006 07:25:36: LoadINIVariable(Commands, FightBackSTR) = [fight back]
26/05/2006 07:25:36: LoadINIVariable(Commands, HealMeSTR) = [heal]
26/05/2006 07:25:36: LoadINIVariable(Commands, YouAreRessSTR) = [you are ressed]
26/05/2006 07:25:36: LoadINIVariable(Commands, MobOnMeSTR) = [mob on me]
26/05/2006 07:25:36: LoadINIVariable(Commands, PauseSTR) = [pause]
26/05/2006 07:25:36: LoadINIVariable(Commands, UnPauseSTR) = [start]
26/05/2006 07:25:36: LoadINIVariable(Commands, EmergencySTR) = [emergency]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightGray) = [FALSE]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightGrayLevel) = [3]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightGreen) = [TRUE]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightGreenLevel) = [4]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightBlue) = [TRUE]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightBlueLevel) = [3]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightWhite) = [TRUE]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightWhiteLevel) = [2]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightYellow) = [TRUE]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightYellowLevel) = [1]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightOrange) = [TRUE]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightOrangeLevel) = [1]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightRed) = [FALSE]
26/05/2006 07:25:36: LoadINIVariable(FightMonsters, FightRedLevel) = [1]
26/05/2006 07:25:36: LoadINIVariable(SystemVars, TurnFactor1) = [0.09]
26/05/2006 07:25:36: LoadINIVariable(SystemVars, TurnFactor2) = [0.14]
26/05/2006 07:25:36: LoadINIVariable(SystemVars, ComputerSpeed) = [MEDIUM]
26/05/2006 07:25:36: LoadINIVariable(HotKeys, LoadHotKeys) = [FALSE]
26/05/2006 07:25:36: LoadINIVariable(HotKeys, HotKeysLoadFile) = [hotkeysfile]
26/05/2006 07:25:36: LoadINIVariable(Test, TestSTR) = []
26/05/2006 07:25:36: EXITING LoadCharINI()
26/05/2006 07:25:36: ERROR: Failed to Load Char INI File.  Look for ERRORS above.  ABORTING SCRIPT...
26/05/2006 07:25:36: *** Script Complete!

; For Function keys, use F1-F12 and it IS case sensative
; Other Special Keys (Must match the spelling and case exactly)
; BACKSPACE, SPACE, PGUP, PGDOWN, END, HOME, LEFTARROW, RIGHTARROW, DOWNARROW, UPARROW,
; INSERT, DEL, NUMLOCK, SCROLL, LBUTTON, RBUTTON, MBUTTON, PAUSE, PRINT, MULTIPLY, ADD, SUBTRACT, TAB
; For Spells on quick bars, 0-9 and -, = are fully supported
; Any items you don't set, use ~ as the value

; Make sure ESCAPE is set as default for the follow setup (this is std game setup, but just in case you changed it)
; Options/Controls/Targeting Keys/Deselect
; Options/Controls/Window Keys/Close Top Window


[Version]
INIVersion=3.1

; TestMode to help debug various issues
; 0    - OFF - Normal mode to run the script in
; 1   - Test new QuickBar logic using SHIFT-# by going through each bar 1 second pause
; 2   - Turn Testing
; 3   - Run Speed LPS testing
; 4   - Run Loc Points Testing
; 5   - LoadLootList() Testing
; 6   - Turn Timing testing
; 7   - Turn() function testing - tests 1 to 180 deg increments
; 8   - Test new RunToLoc() functionality tracking a spawnID
; 9   - Test Mob Difficulty - have to use F12 to break out of this one
; 10  - Use this mode to find the distance of mobs for you pull spells
; 11  - Use this to automatically set your INI turn factors at the end of this INI if you are not turning right
; 12  - internal test
; 13  - internal test
; 99  - This is a goodie, set a ini variable TestSTR in section Test and put what you want to search mob or object
;   If it find what you looking for it will display in the status windows with the location.
;   Ex: Looking for a ground spawn name beetle, then set the variable to beetle, make sure that you are as much
;   specific as possible because it will only display the first one it find.

TestMode=0

[BasicCharSetup]
; What Role is that character in during this scripting
; OFFENSIVE, BUFFBOT
; OFFENSIVE - You fight as a primary fighter - look for things to fight and get the job done
; BUFFBOT   - You are there to tag along with a OFFENSIVE bot or real player and respond to commands. 
;  You will fight back if attacked (and not respond to commands until done fighting)
CharRole=BUFFBOT

; YOUR EQ2 Directory - always have trailing \
EQ2Dir=c:\Program Files\Sony\Everquest II\

; Name of the EQ2 Server you are playing on.
EQ2Server=*******

[Commands]
; ====================================================
; = Commands to control your BUFF BOT
; ====================================================

; You will want to CUSTOMIZE these to be specific to you so everyone isn't saying the same commands

; When a VALID MASTER sends this string, the "GroupBuffSequenceSTR" below is performed on them
BuffMeSTR=hit me up

; When a VALID MASTER sends this string, the next available "HealSequenceSTR" will be cast on them
HealMeSTR=heal

; When a VALID MASTER sends this string, the next available "HealSequenceSTR" will be cast on them
GroupHealSTR=group heal

; When a VALID MASTER sends this string, the bot will target the MASTER and start their "CombatSequence1STR"
; which will make them fight back
; After the kill is done, the bot will go right back into listen for request mode, so if you are fighting
; multiple targets, send the command again to make them help you again
AssistMeSTR=help me please

; When a VALID MASTER sends this string, the bot will go into STAND DOWN mode, which means you do not
; fight back when attacked.  You will still respond to the Assist command.  Used to keep a bot from attacking
; when attacked and you didn't want them to fight back and blowing though their mana
; Right now it doesn't work while they are already fighting, but will in the next release
StandDownSTR=stand down

; When a VALID MASTER sends this string, the bot will go into FIGHT BACK mode, which means the bot will
; defend itself if attacked and fight back
FightBackSTR=fight back

; When a VALID MASTER sends this string, the bot will follow you
FollowMeSTR=fol

; When a VALID MASTER sends this string, the bot will stop follow you
StopFollowingSTR=stop

; When a VALID MASTER sends this string, the bot will LOG OUT to char screen
LogOutSTR=log out please

; Tell the bot to heal themselves
HealYourselfSTR=Give yourself some lovin

; When a VALID MASTER sends this string, the bot will try to ress him
ResMeSTR=bring me back

; String to send after ress
YouAreRessSTR=you are ressed

; String to send when buffbot get attack
MobOnMeSTR=mob on me

; String to send to pause buffbot
PauseSTR=pause

; String to send to unpause buffbot
UnPauseSTR=start

; String to send for emergency action
EmergencySTR=emergency

[QuickBarSetup]
; ------------------------------------------------------------------------------------------------
; This is the same setup for:
;          BeforeCombatSequence1STR, InitialCombatSequence1STR, PerMobCombatSequenceSTR, CombatSequence1STR,
;         AfterCombatSequence1STR, HealSequenceSTR, HealSequenceSTR, BuffSequenceSTR, GroupBuffSequenceSTR,
;         PowerSequence1STR         
;
; For CastTime and RecastTime, these can be take right from the in-game details window for that spell
; format is:
; QUICKBAR,Name,KEY,CastTime,ReCastTime,QUICKBAR,Name,KEY,CastTime,RecastTime,...
; Example: qb1,Weaken,1,1s,5s,qb2,Dust Blast,2,2s,2s
; This would mean on QuickBar1, cast Weaken which is on Key 1, it takes 3 seconds to cast, 5 seconds to recast
;    Then on QuickBar2, cast Dust Blast, which is on Key 2, it takes 2 seconds to cast and 2 seconds to recast
;
; There is a max of 20 items in any sequence, if anyone finds this a limit, let me know
;
; The Name is the name of the spell on the KEY you are casting.  It is ONLY used for debugging as it will display
; what spell it is casting in the debug window and you can visually see if that is the spell being cast
; Very handy when you code the KEY wrong or move your hot keys around and not sure why the wrong spells are
; going off.  You can visually see that you expected to caste a Dust Blast, but a Heal is going off, oopss!
; ------------------------------------------------------------------------------------------------

; BEFORE Combat Seq - a sequence done ONCE before a fight takes place (buffing up, pre-heals etc.)
; This will not take place if you are jumped as there is no before fight
; This sequence will automatically target the BOT before casting...
; Not sure what type of char will use this, but you never know... I used it to do a Cut Throat before the fight
; which was pretty funny looking
; If you don't want this to "hang" on the recast timer, just set it to 1s, and if this spell isn't ready,
; it will just try to cast it again, won't work, but not lock on it
BeforeCombatSequence1STR=~

; INITIAL Combat Seq - a sequence done ONCE at the opening of a fight
;
; For the OFFENSIVEBOT, use it for you PULL moves - Bow, thrown weapon, etc.
; If you are using PullToSafeSpot, set the CASTTIME of the pull to something small like 1s
; If you are NOT using PullToSafeSpot, then set CASTTIME to a few seconds to allow the mob to get on you
; before it goes into Melee mode and might think it's too far.  If you find yourself running TO the mob
; before it gets to you, increase the CAST time
; For OFFSENSIVEBOT, will not take place if you are jumped
;
; For BUFFBOT, this is a good place to put things things you want to START during combat
; and use the Response Strings below to keep active as they finish.
; Examples are reactive heals, wards, etc.
; For BUFFBOT, these will take place even if you are jumped
InitialCombatSequence1STR=~

; Use this for Bows and any other attacks that use the actual RANGE Attack button
; Have to have a special setting just for pulling with Range Attacks as they work different than spell
; pulls.  A Range Attack locks you onto the mob and you have to hit Escape() to clear that and be able
; to run back to your starting point.  This can be set to TRUE even if you use a spell to pull it will
; just take longer to get your target back (ie. until the mob hits you again and becomes the target)
UsingRangeToPull=FALSE

; Per MOB Combat Seq - a sequence done ONCE per Mob.  This happens if you are fighting multiple mobs, the
; InitialCompbat above will only happen once, the PerMob will happen at the beginning of each mob.
; Good for DOT, DeBuffs, etc.
; If you have a pet, put your pet attack on a QB and use this to send the pet after the target - works well
; These will take place even if you are jumped
PerMobCombatSequence1STR=~

; Combat Seq - a sequence done OVER and OVER during the main fight
; Used for all attacks - Direct Damage, Kick, Taunt, etc.
; You can also use Heroic Opps in here - if you have a multi-stage Heroic opp, use the ResponseStrings below
; and when it matches the stage 1 string, use it to do the stage 2 opp - works pretty cool
CombatSequence1STR=qb1,Nuke,7,1s,10s,

; Combat Seq GROUP - a sequence done OVER and OVER during the main fight with group mob
; Used for all attacks - Direct Damage, Kick, Taunt, etc.
; You can also use Heroic Opps in here - if you have a multi-stage Heroic opp, use the ResponseStrings below
; and when it matches the stage 1 string, use it to do the stage 2 opp - works pretty cool
CombatSequence2STR=~

; Combat Seq - a sequence done AFTER the fight is over
; Not sure what it will be used for yet, but in here just in case!
AfterCombatSequence1STR=~

; In EQ2, healing is different, so give options for heals
; Put all your direct heals here, it will do them in order if they are all ready.
; Always put your BEST/FAST heals first, then your weaker heals.
; The way it works is, if the timer is up for the first (best) heals, it will always cast them first
; If not ready, it will keep going down the list until a heal that can be cast is ready
; If you ask for a heal and your health is > 90%, the bot will tell you you don't need a heal.  This was put in
; so valuable power isn't wasted if you mash the heal key 5x during a fight, you will get your heals till you are
; > 90%, then it ignored the rest
HealSequenceSTR=qb1,Salve,-,1s,5s,

; What Health percent do you or your group mates have to be before you will auto heal them
; Only matters if you have the HealSequenceSTR setup - if not setup, this is ignored
HealPercentSTR=70

; This is a second level of healing if you want to cast a different set of heals when health is even lower
; than the one above.  Examples of uses are for a Monk, you can put your MEND in the HealSequenceSTR and set
; HealPercentSTR=75, then set this heal as Feigh Death and HealPercent2STR=15.  Other uses could be for
; Reactive heals in the one above, and direct heals in this one... if it is not set, the regular heals
; above will always be cast
; One big note is that it will continue to try to do this sequence until you are above HealPercentage2STR
; If you only have one thing in here with a long recast timer, it will appear to "lock" as it has nothing else
; to cast...
HealSequence2STR=~

; What Health percent do you or your group mates have to be before you will auto heal them using Seq2
HealPercent2STR=70

; Set to TRUE if you want to AUTOMATICALLY heal everyone is the group. 
; Set to FALSE if you just want to HEAL yourself when needed (ie. below HealPercentSTR
; What this can be used for is if you are a Monk and use Mend, it only works on you, so set it to FALSE so
; it doesn't try to trigger a mend when other people need a heal.  Another reason would be if you had multiple
; bots in a group and some you only wanted to heal themselves
; If a person ASKS for a heal, you will still respond, just not automatically heal them when needed
HealOthersSTR=TRUE

; This is a check made when people manually ask for a heal, if their heal is above this number, then the bot
; respond saying they are not getting a heal.  Is is good for when a person spams heals to the bot, the bot
; will ignore the heal requests once you are healed above this number, thus conserving mana. 
; DEFAULT: 90
MinHealCheckForPlayers=70

; Put all your GROUP heals here, it will do them in order
; If the bot sees more then 1 person hurt, it will choose a group heal instead of a single person heal to try to
; get everyone healed up.  If you don't have a group heal, then it will continue to use single heals
GroupHealSequenceSTR=~

; At what POWER % do you stop fighting back and just be available for heals (so you don't blow all your power)
; What it will stop doing is the CombatSequenceSTR.  All AUTO heals, AUTO group heals ResponseSequenceSTR and
; CombatResponseSequenceSTR are still active as you want to still respond to events, just not burn up power
; Set to 0 if you just want the bot to blast forever
; For Offensive Bots, set to 0, you want to fight until you are out of power, right?
StopFightingPowerSTR=0

; At what power do you kick in the PowerSequence1STR
; Used to cast any spells that need to trigger off you running low on power, such as a power draw from
; a pet
PowerTriggerSTR=90

; When Power is belo wPowerTriggerSTR, do this sequence
; Used to cast any spells that need to trigger off you running low on power, such as a power draw from
; a pet
PowerSequence1STR=~

; This is the buff sequence for YOU when you first start the script, and after each wears off
; The timing is a little different then the Heal or Combat sequence as you want to put the recast
; time as the time the buff lasts so it knows when to recast it.  If a buff lasts 15 mins, you would put
; 900s so it recast every 15 mins.  If it lasts 12 hours, just put some large number.
BuffSequenceSTR=~

; This is the sequence to cast after being ressed.
AfterRessSequenceSTR=~

; Buff that you cast on another player when they ask for it using commands at top
; Treat the setup just like Heal and Combat where the recast is the actual recast so you can be ready
; to cast them again on another player
GroupBuffSequenceSTR=~

; Put pet heal spell here
PetHealSequenceSTR=~

; When do we heal pet
HealPetAt=80

; Spells you wanna cast after harvesting a node
AfterHarvestSequenceSTR=~

; ------------------------------------------------------------------------------------------------
; This is the same setup for:
;          ResponseSequenceSTR, CombatResponseSequenceSTR
;
; format is:
; StringToSearchFor,QUICKBAR,Name,KEY,CastTime,ReCastTime,TargetType...

; For CastTime and RecastTime, these can be take right from the in-game details window for that spell
;
; Valid Target Types: MASTER, YOURSELF, TARGET, NONE
; MASTER means to cast on whoever sent the request
; YOURSELF means, well, cast on YOU!
; TARGET means to cast on current target, which in OFFSENSIVE mode is your mob target and BUFFBOT mode
;          is usually whoever you are Assisting as you keep them targetted
; NONE means there is no need to target anyone to cast this spell, just cast it!
; NOTE: You really don't want to use YOURSELF during combat responses as it messes up who is targetted,
;       since you can cast a beneficial spell on what you are attacking, just set it to NONE and it will
;        cast on yourself by default
;
; Example: scare em off,qb6,Phantasm,8,1s,900s,MASTER,hits a Bloodskull,qb9,Orc Master Strike,3,2s,60s,TARGET
; This would mean when you see "scare em off" from a valid MASTER, change to QuickBar6, cast Phantasm,
; which is on Key 8, it takes 1 second to cast and 900 seconds to recast.  Also, it would look for
; "hits a Bloodskill" and if seen, change to QuickBar9, cast Orc Master Strike, which is on Key 3, it takes
; 2 seconds to cast and 60 secods for recast
;
; The Name is the name of the spell on the KEY you are casting.  It is ONLY used for debugging as it will display
; what spell it is casting in the debug window and you can visually see if that is the spell being cast
; Very handy when you code the KEY wrong or move your hot keys around and not sure why the wrong spells are
; going off.  You can visually see that you expected to caste a Dust Blast, but a Heal is going off, oopss!
;
; These are both VERY powerful as now you can write your own triggers
; It can be used for simple MASTER commands you want to write, or more sophisticated rules such as responses
; to multi-stage heroic events.  You can also use it to do things such as when to cast a MASTER spell. 
; If you see you are attacking a certain type of creature, (ie Orcs, skels, zombies),
; put it in CombatResponseSequenceSTR and it will only do these when it sees text that you are attacking them.
; You can think of all kinds of things to do in here.  Watch for Spectral Ward wearing off and recast it, setup
; MASTER's asking you for SOW, or a cure or a group heal, etc.  Be creative and SHARE your ideas on how you are
; using this so others can think of ideas.
; ------------------------------------------------------------------------------------------------

; These are looked for at any time, always active whether in or out of a fight
ResponseSequenceSTR=~

; These are looked at ONLY during combat - for things like keep your ward on your while fighting,
; Master speels, etc.
; NOTE: You really don't want to use YOURSELF during combat responses as it messes up who is targetted,
;       since you can cast a beneficial spell on what you are attacking, just set it to NONE and it will
;        cast on yourself by default
CombatResponseSequenceSTR=~
PetBuffSequenceSTR=~

[OtherMappedKeys]
; ====================================================
; =Other Mapped Keys ================================
; ====================================================
; These are other mapped keys you must configure not on Quick Bars (Can ONLY be lower case!!!)

; In EQ2 - this is set to target Self
; Found under -> Options/Controls/Targeting Keys/Select Self
; Default is usually F1
TargetFriendlySTR=F1

; Target nearest player
TargetPCSTR=F7

; Attack Key mapping
; Found under -> Options/Controls/Command Keys/Auto Attack
; Default is usually not set - so set it!
AttackSTR=`

; Found under -> Options/Controls/Command Keys/Consider
; Default is usually not set - so set it!
ConsiderSTR=v

; Target Monsters
; Found under -> Options/Controls/Targeting Keys/Select Next PC
; Default is usually TAB
TargetMonsterSTR=TAB

; In Keyboard setup - used to loot
; Found under -> Options/Controls/Command Keys/Trigger Default Action
GetSTR=f

; Run Lock - toggles run on and off - default is Insert
; Found under -> Options/Controls/Movement Keys/Auto Run(toggle)
; If you hit INSERT in the options menu in game, it shows is <NUMPAD>, but you can still set as INSERT in this
; script and it works fine
RunLockSTR=NUMLOCK

; Key to Exit Script
ExitScriptSTR=MBUTTON

; Key to Pause/UnPause Script
PauseToggleSTR=INSERT

; Sprint QB & Key - Used when a member of the party yells for help, you want the bot to Sprint and follow you
; at full speed to try to get away
SprintQB=1
SprintSTR=1

;Ressurection spell QB & Key - used when asking for ress
RessQB=~
RessSTR=~

; If these are set, will use them instead of the /follow command which can mess things up at times due
; to the way XU sends text when lagging... this is faster and less in the log, so use it!
FollowQB=~
FollowSTR=~

; Manually have the bot find all Master's again - because people can zone, create pet's, etc and not all create
; a trigger event to find everyone's spawnID again, if you see people are missing in the Health window, then
; manually force the bot to reread everyone - doesn't take long.  If someone isn't in the healh window, they
; will not be able to issue commands and not be being watched for health to be healed
GetAllMastersSTR=DEL

; You keys mapped to Left/Right turning & Strafing.
; Found under -> Options/Controls/Movement Keys/TURN Left
TurnLeftSTR=a
; Found under -> Options/Controls/Movement Keys/TURN Right
TurnRightSTR=d
; Found under -> Options/Controls/Movement Keys/MOVE Left
StrafeLeftSTR=z
; Found under -> Options/Controls/Movement Keys/MOVE Right
StrafeRightSTR=c

; Assist - if not set, will use "/assist", but using a key is MUCH better, less text to the log
; Found under -> Options/Controls/Command Keys/Assist
AssistSTR=.

; Target Previous Mob - if not set, will not use it, but less intelligence in targetting
; Found under -> Options/Controls/Targeting Keys/Select Previous Target
TargetPreviousSTR=~

; Close Game Windows - if not set, will use "/close_top_window", but using a key is MUCH better, less text to the log
; Used due to new LORE/NO TRADE items where if you hit escape on the window, it just opens another message
; makes a mess of the screen, so this will close top windows if you can't loot them
; Found under -> Options/Controls/Command Keys/Close Game Windows
CloseGameWindowSTR=\

; Key to initiate chat, normaly its ENTER but I sugest something else.
InitChatSTR=[

; What key on quickbar you want for Pet Attack
PetAttackSTR=1

; What key on quickbar you want for Pet Backoff
PetBackOffSTR=1

; What key on quickbar you want for Pet Guard Me
PetGuardMeSTR=1

; What key on quickbar you want for Pet Guard Yourself
PetGuardYouSTR=1

; Quick bar where you put your pet commands
PetQBar=1

; What key on quickbar you want for your spell to summon pet
PetSummonSTR=1

; Emergency action QB and Key, you can use Emergency to cast Evac, feign death etc.
EmergencyQB=~
EmergencyKEY=~

[FightingVariables]
; ====================================================
; =Fighting Variables ===============================
; ====================================================
; These are other Variables you need to configure based on how you want to fight

; Do we hunt or not
Hunting=FALSE

; Do you fight Back if you are in BUFFBOT mode if you are attacked
; By default, you will always fight back if you are in offensive mode
FightBack=TRUE

; Number of time it will loop in targetmonster, if you want to harvest do not put a number above 2-3
; If you dont harvest then you can put a very high number
TargetLoopTime=2

; Se to true if you wanna turn while targetting for monster
TurnForTarget=TRUE

; Number of Hours until the game auto quits & Logs out - 0 mean unlimited
QuitTimer=0

; 0-100 - how much % health you want to have before you begin a battle.   
; You will stay in Recover mode until you hit this %
; If you have problems reading the health, set to 0 to keep the script running until you figure out the problem
PercentHealth=100

; 0-100 - how much % power you want to have before you begin a battle.   
PercentPower=80

; 0-100 - how much % power your GROUP needs to all have before you begin a battle.   
GroupPercentPower=80

; 0-100 - how much % health you want your pet to have before you begin a battle.   
; You will stay in Recover mode until you pet hit this %
; If you have problems reading the health, set to 0 to keep the script running until you figure out the problem
PetHealth=90

; Separate with commas, no spaces between entries
; These are the ONLY people who you will respond to for commands
; The name IS case sensitive, so match it exactly or the target will not work
ValidMasters=****

; Separate with commas, no spaces between entries
; Used to SEARCH for any mobs - not fully implemented yet
SearchForNames=~

; Log out when you die
; If this option is set to TRUE, if you die, you will log out
; If set to FALSE, when you die, the script will end, but you won't log out.
LogOutWhenYouDie=FALSE

; Number of minutes to wait before logging off if nothing happend, buffbot only
IdleTimer=30

; Log out if you ask for ress and didnt get one in 10 minutes
LogOutIfNotRess=FALSE

; Ressurection setup, RessMaxTime is the number of time you can be ress in a session
RessMeIfDie=FALSE
RessMaxTime=5

; Leader
; The name IS case sensitive, so match it exactly or the target will not work
ValidLeader=*****

; Follower
; The name IS case sensitive, so match it exactly or the target will not work
ValidFollowers=~

; Do you want the buffbot to folow the leader when script start.
FollowLeaderAtStart=TRUE

; ================================================================================================
; ================================================================================================
; = The commands from here to the end are for OFFENSIVE bot only
; ================================================================================================
; ================================================================================================

; Used to determine how close you need to be before you start combat.  Depends on what you are using in
; InitialCombatSequence and what the range is.  Might need some experimentation to get it right.
; If the bot keeps stopping too far away to engage, make this smaller.
; If you set it to 0, it will run right up to a mob before attacking (thought if the mob is aggro, it will
; jump you first and the bot will stop then and there and start fighting)
MaxTargettingDistance=30

; Used to pull mobs back to a safe spot.  Right now, the safe spot is defined as your starting loc when you
; start the script.  The way it works is the bot will find a mob to fight, go after it, do your InitialCombatSequence
; first item only, turn and run back to safe spot and fight. 
; If you turn this option on and the InitialCombatSequence isn’t set, it will ignore the option as you have no set pulling mechanism. 
; Good in tough areas where you don't want to dig
; youself in too deep fighting.
; If RandomRunMode below is set to SAMESPOT, this is ignored
PullToSafeSpot=FALSE

; How many kills (it takes +/- 20 %) before we pause for a few mins to look like a real person taking a break?
; Default of 25 is a good number, but up to you!
; Not used for BUFFBOT
PauseAfterThisManyKills=50

; RandomRunMode: SAMESPOT, ROAMAROUND, CLOSESTSCON
; If SAMESPOT, just fight in the same place - good for camps
; If ROAMAROUND, then it will fight in the area define by RandomRunRange but will not come back
;     to start point after killing.
; If CLOSESTSCON, then it will go towards the closests monster if you have it set to fight them
; Not used for BUFFBOT
RandomRunMode=SAMESPOT

; *** Big chagne from all version before v2.6 ***
; Set in LOC POINTS now - was the only thing in seconds with distance, so made it consistent with everything
; When RandomRunMode=RANDOMPOINTS or CLOSESTCON, this sets the maximum radius you want to run around
; Imagine a circle drawn around you with the radius how far you can run, that is your
; hunting ground.  When monsters are spread out, I set this to a high number (maybe 60).  When things are
; packed in tight, or there or tougher cons that I don't want to engage, I set it lower (10-15) so my hunting
; circle stays tight.
; When RandomRunMode=RANDOMSQUARE, this sets the size of the square (not used much) - this is a test mode anyway
; Other modes it is just ignored
; Not used for BUFFBOT
RandomRunRange=0

; Do we stafe when we cant see monster
DoWeStrafe=TRUE

; Do you use a pet
HavePet=FALSE

; Do we pull with our pet
PullWithPet=FALSE

; Type of pull for pet
; Type are PETPULLWAIT, pull pet after TypePetPullSTR sec
;          PETPULLMOBHEALTH, pull pet when mob health is below TypePetPullSTR
;          PETPULLPETHEALTH, pull pet when pet health is below TypePetPullSTR

TypePetPull=PETPULLMOBHEALTH

TypePetPullSTR=99

; Do you want to fight non aggro monsters?
FightNonAggro=FALSE

; Do we fight named monster
FightNamed=FALSE

; Do you want the buffbot to move closer to target to engage in hand-to-hand combat
BuffbotMoveToTarget=TRUE

; Number of SECONDS used as a BASE number for when you stop at each CHECKPOINT (no matter the mode) and
; look for a con using the target closet key.  If you don't set it or set it to zero, it will do 2-8 seconds
; at each location.  If you set it to 1, it will do 1. If you set it to > 1, then it will do the number +- 50%
; For CLOSESTSCON - 5-8 is a good setting.  For SAMESPOT - 8-15 is a good setting.
; Not used for BUFFBOT
LookForMonsterTime=5

; When you reach your loot weight limit (ie. you are being encumbered) stop looting if set to TRUE.
; If set to FALSE, will loot until all slots are full and stacks are full... and you might not be able to move!
; Not used for BUFFBOT
StopLootingWhenFull=FALSE

; set to true if you want to loot monster
LootMonster=FALSE

; set to true if you want to loot chest
LootChest=FALSE

; Set to true if you want the buffbot to hit the ENTER key every 30 seconds when not in combat to participate in lotto.
LottoEnter=FALSE

; You do not need to put anything in this list, the script will create and update the INI as it finds
; objects that are not attackable.  The purpose it to keep the bot from trying to "consider" these objects each
; time it targets them - since the bot can see the name, it will compare and just quickly skip them.
; It is also used in the retrieval of valid mob targets - sometimes things come up that are not attackable, but have
; a level that fits into your fighting range, but comparing to this list, they will not be a valid target the bot
; will try to run to
NonAttackableObjects=a Bit of Flotsam


; List of mob you dont want to fight.
IgnoreMobList=~

; Use emergency action when you reach this health or below
EmergencyHealth=0
PetName=~

[FightMonsters]
; ====================================================
; = Color Con Monsters to Fight & Herioc ops =========
; ====================================================
; Do we Fight this con?
; What level of Heroics  do we fight
; 1 mean only fight normals or below (^ and below)
; 2 means fight (^^) ups  or below
; 3 means fight (^^^) ups  or below
; 4 means fight it all!
; Of course it is ignored if the FightCOLOR is set to FALSE

FightGray=FALSE
FightGrayLevel=3

FightGreen=TRUE
FightGreenLevel=4

FightBlue=TRUE
FightBlueLevel=3

FightWhite=TRUE
FightWhiteLevel=2

FightYellow=TRUE
FightYellowLevel=1

FightOrange=TRUE
FightOrangeLevel=1

FightRed=FALSE
FightRedLevel=1

[SystemVars]
; ========================================================
; = These are variable you usually won't need to         =
; = change, if you do, follow the instructions for each  =
; ========================================================

TurnFactor1=0.09
TurnFactor2=0.14
ComputerSpeed=MEDIUM

[Waypoints]
; =========================================================
; = Variable to set for waypoint navigation               =
; = Max number of waypoint is 500                         =
; =========================================================

; NavigationType
;
; NAVLOOP   At last waypoint will go back to waypoint 1, ex: 1 2 3 4 1 2 3 4
; NAVSTOP   Will stop at last waypoint
; NAVCOMEBACK   At last waypoint will come back backward, ex: 1 2 3 4 3 2 1 2 3 4 etc.

NavigationType=NAVLOOP

NumberOfWaypoints=3

; Waypoint locx, locy, facing angle, time to stay there, max harvesting range
waypoint1=

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

waypoint2=-360,196,0,5,50
waypoint3=-364,300,0,5,50

ParkBuffbot=TRUE


[Harvest]
; =========================================================
; = Variable to set for harvesting                        =
; =                                                       =
; =========================================================

Harvest=FALSE

;Harvest quickbar
HarvestQB=5

;Range to harvest if you dont use waypoint
RangeToHarvest=50

; Maimum number of try per node
MaxHarvestPerNode=6

; Range to check if Player near ressource
RangeToCheckPC=15

[Ressources]
; Do you want to harvest that ressource True/False, key on hotbar for harvesting this ressource
ORE=TRUE,3
STONE=TRUE,3
COLLECT=TRUE,6
WOOD=TRUE,2
DEN=TRUE,4
ROOTS=TRUE,1
SHRUB=TRUE,1
FUNGI=TRUE,1
FISH=FALSE,5
MISC=TRUE,1

[RessourcesName]
COLLECT=?,!
FUNGI=natural herb garden,high plains fungi
ORE=blemished ore,stonecrest ore,cloven ore
FISH=array of fish,mob of fish
ROOTS=damp roots,mesquite catch weed,sun bleached roots,desert roots
DEN=creature den,beast den,critter den
SHRUB=natural garden,high plains shrubbery,parched shrubbery,oasis shrubbery
WOOD=aged arbor,felled high plains arbor,arid timber
STONE=unearthed stones,wind swept stones,wind swept rock
MISC=withered bones

[Test]
TestSTR=~

[Hotkeys]
LoadHotKeys=FALSE
HotKeysLoadFile=hotkeysfile